SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED QUALIFICATION THAT HAS PASSED THE END DATE: 

National Certificate: Wood Products Processing 
SAQA QUAL ID QUALIFICATION TITLE
49083  National Certificate: Wood Products Processing 
ORIGINATOR
SGB Wood Products 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY NQF SUB-FRAMEWORK
FPMSETA - Fibre Processing and Manufacturing Sector Education and Training Authority  OQSF - Occupational Qualifications Sub-framework 
QUALIFICATION TYPE FIELD SUBFIELD
National Certificate  Field 01 - Agriculture and Nature Conservation  Forestry and Wood Technology 
ABET BAND MINIMUM CREDITS PRE-2009 NQF LEVEL NQF LEVEL QUAL CLASS
Undefined  130  Level 3  NQF Level 03  Regular-Unit Stds Based 
REGISTRATION STATUS SAQA DECISION NUMBER REGISTRATION START DATE REGISTRATION END DATE
Passed the End Date -
Status was "Reregistered" 
SAQA 06120/18  2018-07-01  2023-06-30 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This qualification does not replace any other qualification and is not replaced by any other qualification. 

PURPOSE AND RATIONALE OF THE QUALIFICATION 
A learner acquiring this qualification will be able to operate as a knowledgeable and appropriately skilled first line supervisor, in an effective and efficient manner, either as a member of a working team or an individual when required, performing the tasks prescribed for this level in the unit standards for Wood Products Processing.

The learner will know and understand the wood products processing operation and the relevant details of the process in his/her workplace. The learner will be able to perform the relevant tasks in the workplace to the prescribed standards, while correctly following the prescribed work procedures, and the health and safety and environmental protection measures applicable to the specific workplace. The learner will be able to interpret and comply with the prescribed aspects of certain legislation impacting on his/her work situation. The learner will be able to communicate effectively, orally or in writing, with co-workers and responsible persons in the workplace. Competent learners will be able to demonstrate the required levels of knowledge and skills to achieve the outcomes described below.


Rationale

The typical learner identified to benefit from this qualification will be an individual who is currently employed within the field of Wood Products and any unemployed persons who wishes to enter a learning programme to obtain a National Certificate in Wood Products Processing at an NQF Level 3 with the intention of building a career in this industry. This Certificate offers electives in the following areas of Wood Products Processing: Match Manufacturing; Fibre and Chipboard Manufacturing; Nail plated Truss Manufacturing; Charcoal Manufacturing; Tannin Extraction; Veneer and Plywood Manufacturing; and Wood Preservation.

This qualification will provide the basis for national recognition of the skills involved in wood processing at i.e. supervisor, foreman, team leader, co-ordinator level. It is perceived that the qualification will improve the credibility and general public's awareness of the wood product sector. International unit standards were reviewed during the research process undertaken to develop this qualification. As such, learners who obtain this qualification are expected to contribute to the effectiveness and productivity of the Wood Products Industry in South Africa. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
It is generally accepted that individuals entering this qualification should be literate and numerate at an NQF Level 2, have demonstrated knowledge and skill of the basic production processes in the relevant wood products processing plant and be able to demonstrate the knowledge and skills stipulated in the learning assumptions of relevant unit standards.


Recognition of Prior Learning (RPL)

This qualification may be achieved in part or whole through the Recognition of Prior Learning process and after being assessed by a registered assessor.

A range of assessment methods should be used, including:
  • Direct observation - the learner will be asked to demonstrate his/her ability, perform tasks expected in the working environment.
  • Product sample - examine the portions of reports filed by the learner in order to ascertain his/her knowledge of the skills covered in this unit standard.
  • Simulation of a specific task or situation in order to evaluate the learner's knowledge and understanding of the skills required.
  • Questioning (verbal or written) - ask relevant questions linked to the unit standard
  • Testimony - collect a portfolio of evidence from suitable people, for example, reports from a third party. 

  • RECOGNISE PREVIOUS LEARNING? 

    QUALIFICATION RULES 
    This qualification offers flexibility to the learner across the field of Wood Products. In order to achieve the 135 credits required for this qualification, the rules of combination are as follows:
  • Fundamentals: 36 credits - 20 from Language and Communications and 16 from Mathematical Literacy
  • Core: Select 54 credits
  • Electives: Select specialised area of Wood Products e.g. Wood Preservation and then choose 40 credits from that section
  • Total Credits: 130 credits


    Tannin Extraction Electives:
  • Assist in the leaching process
  • Supervise the wattle bark chopping operation
  • Operate and control the leaching process

    Charcoal Manufacturing Electives:
  • Plaster and seal kilns
  • Stack, load and palletise bags of charcoal and/or briquettes
  • Supervise loading of container
  • Fire kilns and chimneys

    Trusses Electives:
  • Cut and prepare timber for roof truss assembly
  • Set jig, assemble, press, handle and store nail plated timber roof trusses
  • Load and off-load trusses and auxiliary material and all other hardware products
  • Inspect and quality assure timber roof truss products and documentation

    Wood Preservation Electives:
  • Control receipt of incoming material (poles and/or sawn lumber) for wood preservation process
  • Manage debarking of poles and logs for wood preservation
  • Manage pole peeling operation for wood preservation
  • Manage classification and grading of poles and timber for wood preservation
  • Control production process to produce debarked and seasoned poles
  • Control process of treating wood with wood preservative
  • Apply quality control in the wood preservation plant
  • Demonstrate knowledge and understanding of the structure of wood and how it relates to its appearance, strength, and water retention
  • Mmanage work force in relevant work areas in wood preservation plant
  • Demonstrate knowledge and understanding of the influence of wood structure, its properties and production factors on quality

    Chipboard Electives:
  • Receive, offload, store and prepare for infeed of timber into the fibreboard and chipboard plant
  • Operate flaker in the chipboard manufacturing process
  • Receive, store and test bulk chemicals in the fibreboard and chipboard manufacturing process
  • Control and monitor mat formation in the chipboard manufacturing process
  • Load mat and press board in the chipboard manufacturing process
  • Operate sanding process in the fibreboard and chipboard process
  • Dry and store fibre in the fibreboard process
  • Load and press board in the melamine faced board manufacturing process
  • Assure quality in the fibreboard and chipboard manufacturing process (compulsory for masonite)

    Match Manufacturing (Board Processing and Packaging) Electives:
  • Operate bar machine to form outer boxes
  • Operate match skillet printing machine
  • Ensure continuous supply of quality matchboxes to wrapping process
  • Operate machine to form inner boxes
  • Prepare ignition paint
  • Ooperate wrapping machine
  • Control application of match head composition
  • Prepare and mix match head composition

    Veneer and Plywood Electives:
    Grade veneer / plywood / block board within a veneer / plywood / block board plant
  • Set up and operate log debarking and conditioning facilities in wet processing area of veneer/plywood/block board plant
  • Set up and operate log handling, sorting and storage facilities (log yard / deck) in wet processing area of veneer/plywood/block board plant
  • Set up and operate peeling/ slicing facilities in wet processing area of veneer/plywood/block board plant
  • Set up and operate drying facilities in wet processing area of veneer/plywood/block board plant.
  • Set up and operate veneer upgrading processing facilities in dry processing area of veneer/plywood/block board plant
  • Set up and operate board edging and squaring facilities in the dry processing area of veneer / plywood / block board plant
  • Set up and operate board cross-cutting / trimming facilities in the dry processing area of veneer/ plywood / block board plant
  • Set up and control wet/dry hogging production facilities in wet/dry processing area of a veneer/ plywood/ block board plant
  • Set up and operate sanding facilities in the dry processing area of veneer/plywood / block board plant
  • Set up and operate pressing facilities in dry processing area of veneer/plywood/block board plant.
  • Set up and operate glue mixing, handling and storage facilities in dry processing area of veneer / plywood / block board plant
  • Control veneer/plywood / block board grading process in veneer / plywood / block board plant 

  • EXIT LEVEL OUTCOMES 
    On achieving this qualification, the learner will be able to:

    1. Demonstrate an understanding of the production processes of the relevant Wood Products Processing environment and carry out the tasks prescribed with regards to production operations, general cleaning operations, manual handling, details of equipment, processes and procedures as stipulated in the unit standards for the NQF Level 3 qualification.

    2. Demonstrate the level of knowledge and understanding of the prescribed work procedures, health and safety and environmental standards, as stipulated in the unit standards for the NQF Level 3 qualification.

    3. Demonstrate the ability to operate in a team, to use effective communication skills, and an understanding of the impact of both the individual and the team on the organisations strategic goals, as required at the stipulated NQF Level.

    4. Demonstrate the ability to carry out the tasks of their specific work environment with knowledge and understanding, as stipulated in their elective unit standards.

    5. Interpret, explain verbally or in writing, and comply with the prescribed aspects of the legislation for the stipulated NQF Level, that impacts on his/her work situation. (Range: The OSH Act, the Labour Relations Act, the Skills Development Act, the Employment Equity Act, Environmental Acts and the Basic Conditions of Employment Act.) 

    ASSOCIATED ASSESSMENT CRITERIA 
    1.
  • The learner demonstrates that he/she has an understanding of the production processes of the relevant Wood Products Processing environment by correctly explaining the main purpose of the organisation's operation, the general layout of the plant, the sequence of the production phases in the production process and the general functions of the major production equipment and stages in the operation at the stipulated NQF Level as per the relevant organisation's work instructions.
  • The learner demonstrates his/her skill by carrying out the relevant production, general cleaning and manual handling tasks at the stipulated NQF Level as per the relevant organisation's work instructions.

    2.
  • The learner correctly explains his/her relevant work procedures, safety and health measures and environmental requirements pertaining to the stipulated NQF Level requirements for this workplace as per the relevant organisation's work instructions.
  • The learner demonstrates his/her knowledge by adhering to the relevant work procedures, safety and health measures and environmental requirements pertaining to the stipulated NQF Level as per the relevant organisation's work instructions.

    3.
  • The learner communicates effectively in the workplace, using effective communication skills, to achieve his/her job outcomes.
  • The learner uses effective communication skills to lead a team and to operate effectively in a team.
  • The learner demonstrates his/her understanding of the importance and impact of teamwork on the achievement of the organisations strategic goals by communicating effectively with the team, by co-operating with team members, by showing tolerance, by good time keeping, by displaying fairness and by providing leadership.

    4.
  • The learner demonstrates his/her ability to carry out the tasks of his/her specific work environment by meeting his/her job outcomes.
  • The learner demonstrates his/her knowledge and understanding of his/her tasks by explaining the importance of carrying out his/her tasks as prescribed in the relevant organisation's work instructions.
  • The learner demonstrates competence in his/her workplace through good performance and understanding of his/her job role.

    5.
  • The learner demonstrates that he/she has the required level of knowledge and understanding of the prescribed aspects of the legislation at the stipulated NQF Level by providing the correct explanation of the stipulated regulations.
  • The learner uses the correct terminology when providing the explanation of the prescribed aspects of the legislation at the stipulated NQF Level.
  • The learner currently adheres to/complies with the prescribed aspects of the relevant legislation as per his/her job role.


    Integrated Assessment

    The unit standards on which this qualification is based, describe the competent performance in the various areas of Wood Products Processing, and lay down the criteria by which competence should be judged, as well as the range of circumstances in which competence should be demonstrated. For each unit standard there are corresponding performance assessment criteria, which describe the evidence an assessor should use to determine a learner's competence.

    Assessors should design assessment tools and conduct assessment against the unit standards specified in the qualification, that take into account established assessment principles and makes use of a range of formative and summative assessment methods. Integrated assessment methods and tools for this qualification must allow the learner to demonstrate that he/she has acquired the knowledge of and can safely and efficiently apply competence in the relevant aspects of Wood Products Processing, as described in the Purpose of this Qualification, and the Exit-level Outcomes. A portfolio of evidence of the outcomes of all these assessments for each learner must be built up for record purposes.

    Assessors should specifically check for the following:
  • Demonstration of competence of the specific outcomes in context. The context is within a Wood Products Processing environment.
  • Ability to ensure the efficient and effective utilisation of all materials, tools and equipment.
  • Ability to manage production processes
  • Ability to manage staff

    The following formative and summative assessment methods are recommended:
  • Observation
  • Oral questioning
  • Simulation
  • Demonstration and questioning
  • Peer assessment
  • Pen and Paper

    Written Statements from e.g. current or previous employer, colleagues, peers, managers, i.e. persons who can supply relevant references
  • Relevant awards or certificates
  • Previous assessment records
  • Journals/logbook, records of work performance.

    The currently unemployed, who followed a learning programme to achieve this qualification, as well as persons seeking recognition of prior learning, must be assessed in the same manner. 

  • INTERNATIONAL COMPARABILITY 
    Comparisons were done against unit standards and in the New Zealand and Australians Qualifications Authority. Our search discovered that there are currently no national qualifications at the lower levels of Wood Product and Processing. However, comparable unit standards were found at levels 1 to 4 in most of the Wood Products Processing areas. Research found that unit standards allow the learner to choose elective unit standards in domains that are comparable to what is required for this qualification.

    Furthermore, various Websites were investigated for relevant information on training and development best practice in Global Wood Products and Processing, the outcome was found that South Africa had a practice that could serve as a benchmark to the whole of the Wood Products and Processing World. 

    ARTICULATION OPTIONS 
    The choice of elective unit standards for this qualification, can earn credits, which will be valid for learning pathways in the Wood Products sector.

    This qualification allows the learner flexibility and portability in that the fundamental and industry specific core unit standards will provide a platform for the learner to cross over into one of the other areas of Wood Products other than his/her elective. The fundamental and non-industry specific core unit standards will also equip the learner with credits which will be useful in other fields of learning should the learner wish to pursue a complete change of industry at a later stage. 

    MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this Qualification must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Qualification must be accredited as a provider with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQAs policies and guidelines for assessment and moderation; in terms of agreements reached around assessment and moderation between ETQAs (including professional bodies); and in terms of the moderation guideline detailed immediately below.
  • Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards as well as the integrated competence described in the qualification.

    Anyone wishing to be assessed against this Qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • CRITERIA FOR THE REGISTRATION OF ASSESSORS 
    For an applicant to register as an assessor, the applicant needs:
  • A minimum of 2 (two) years' practical, relevant occupational experience in Wood Products Processes such as Match Manufacturing; Fibre and Chipboard Manufacturing; Nail plated Truss Manufacturing; Charcoal Manufacturing; Tannin Extraction; Veneer and Plywood Manufacturing; Bulk Bin, Box and Pallet Manufacturing and Repair; and Wood Preservation.
  • Declared competent in all the outcomes of the registered Assessor Unit Standards.
  • Detailed documentary proof of educational qualification, practical training undergone, and experience gained by the applicant must be provided (Portfolio of evidence) 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this qualification was Reregistered in 2012; 2015. 

    NOTES 
    Notes to assessors

    In order to ensure that judgements are reliable, assessors should collect evidence from a variety of sources and in a number of ways, for example, direct observation, role-plays and simulations, interviews, review of portfolios of work, testimonies from third parties, and formal written, oral or skills tests. Where possible, assessment of performance should be carried out in authentic situations and in an integrated fashion, enabling the simultaneous assessment of multiple specific outcomes and assessment criteria. So, for example, by observing the candidate during the course of preparing and implementing an environmental learning programme, the assessor will be able to assess not only his/her competence as an environmental education practitioner, but also his/her organisational, administrative and teamwork abilities. Furthermore, by observing how the candidate undertakes a community conservation programme, the assessor will be able to gauge how well the candidate understands the particular issue and related environmental concepts and processes.

    The specific outcomes and assessment criteria contained in the unit standards are guidelines for assessors working with practitioners who do not have disabilities or special needs. Special consideration and exemptions should be given to practitioners who cannot fulfil the assessment criteria due to disabilities or other special needs. 

    UNIT STANDARDS: 
      ID UNIT STANDARD TITLE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
    Core  117231  Demonstrate understanding of details of equipment, processes and procedures in a wood products plant  Level 2  NQF Level 02  15 
    Core  13912  Apply knowledge of self and team in order to develop a plan to enhance team performance  Level 3  NQF Level 03 
    Core  113852  Apply occupational health, safety and environmental principles  Level 3  NQF Level 03  10 
    Core  13915  Demonstrate knowledge and understanding of HIV/AIDS in a workplace, and its effects on a business sub-sector, own organisation and a specific workplace  Level 3  NQF Level 03 
    Core  10170  Demonstrate understanding of employment relations in an organisation  Level 3  NQF Level 03 
    Core  13916  Identify and keep the records that a team manager is responsible for keeping  Level 3  NQF Level 03 
    Core  116720  Show understanding of diversity in the workplace  Level 3  NQF Level 03 
    Core  117227  Control production in relevant work areas in wood products plant  Level 4  NQF Level 04  15 
    Fundamental  8968  Accommodate audience and context needs in oral communication  Level 3  NQF Level 03 
    Fundamental  8971  Analyse and respond to a variety of literary texts  Level 3  NQF Level 03 
    Fundamental  9010  Demonstrate an understanding of the use of different number bases and measurement units and an awareness of error in the context of relevant calculations  Level 3  NQF Level 03 
    Fundamental  9013  Describe, apply, analyse and calculate shape and motion in 2-and 3-dimensional space in different contexts  Level 3  NQF Level 03 
    Fundamental  8969  Interpret and use information from texts  Level 3  NQF Level 03 
    Fundamental  13919  Investigate and explain the structure of a selected workplace or organisation  Level 3  NQF Level 03  10 
    Fundamental  9012  Investigate life and work related problems using data and probabilities  Level 3  NQF Level 03 
    Fundamental  7456  Use mathematics to investigate and monitor the financial aspects of personal, business and national issues  Level 3  NQF Level 03 
    Fundamental  8970  Write texts for a range of communicative contexts  Level 3  NQF Level 03 
    Elective  117253  Ensure continuous supply of quality matchboxes to wrapping process  Level 2  NQF Level 02 
    Elective  117288  Grade Veneer/ Plywood/ Block board in veneer/ Plywood/ Block board plant  Level 2  NQF Level 02  20 
    Elective  117234  Operate bar machine to form outer boxes  Level 2  NQF Level 02  10 
    Elective  117208  Operate flaker in the chipboard manufacturing process  Level 2  NQF Level 02  18 
    Elective  117237  Operate machine to form inner boxes  Level 2  NQF Level 02 
    Elective  117236  Operate match skillet printing machine  Level 2  NQF Level 02 
    Elective  117246  Operate wrapping machine  Level 2  NQF Level 02  10 
    Elective  117240  Prepare ignition paint  Level 2  NQF Level 02  10 
    Elective  117207  Receive, offload, store and prepare for infeed of timber into the fibreboard and chipboard plant  Level 2  NQF Level 02  18 
    Elective  117211  Receive, store and test bulk chemicals in the fibreboard and chipboard manufacturing process  Level 2  NQF Level 02  10 
    Elective  117275  Apply quality control in the wood preservation plant  Level 3  NQF Level 03  10 
    Elective  117260  Assist in the leaching process  Level 3  NQF Level 03  20 
    Elective  117209  Control and monitor mat formation in the fibreboard and chipboard manufacturing process  Level 3  NQF Level 03  20 
    Elective  117243  Control application of match head composition  Level 3  NQF Level 03  16 
    Elective  117278  Control process of treating wood with wood preservative  Level 3  NQF Level 03  10 
    Elective  117279  Control production process to produce debarked and seasoned poles  Level 3  NQF Level 03  10 
    Elective  117285  Control receipt of incoming material (poles and/or sawn lumber) for wood preservation process  Level 3  NQF Level 03 
    Elective  117284  Control veneer/ plywood/ block board grading process in veneer/ plywood/ block board plant  Level 3  NQF Level 03  20 
    Elective  117272  Cut and prepare timber for roof truss assembly  Level 3  NQF Level 03  20 
    Elective  117282  Demonstrate knowledge and understanding of the structure of wood and how it relates to its appearance, strength, and water retention  Level 3  NQF Level 03  15 
    Elective  117224  Dry and store fibre in the fibreboard process  Level 3  NQF Level 03  10 
    Elective  117271  Load and off-load trusses and auxiliary material and all other hardware products  Level 3  NQF Level 03  20 
    Elective  117212  Load mat and press board in the chipboard manufacturing process  Level 3  NQF Level 03  15 
    Elective  117218  Load press board in the melamine faced board manufacturing process  Level 3  NQF Level 03  15 
    Elective  117277  Manage classification and grading of poles and timber for wood preservation  Level 3  NQF Level 03 
    Elective  117283  Manage debarking of poles and logs for wood preservation  Level 3  NQF Level 03 
    Elective  117280  Manage pole peeling operation for wood preservation  Level 3  NQF Level 03 
    Elective  117258  Operate and control the leaching process  Level 3  NQF Level 03  20 
    Elective  117214  Operate sanding process in the fibreboard and chipboard process  Level 3  NQF Level 03  12 
    Elective  117205  Plaster and seal kilns  Level 3  NQF Level 03  10 
    Elective  117247  Prepare and mix match head composition  Level 3  NQF Level 03  15 
    Elective  117263  Set jig, assemble, press, handle and store nail plated timber roof trusses  Level 3  NQF Level 03  20 
    Elective  117292  Set up and control wet/dry hogging production facilities in wet/dry processing area of a veneer / plywood / block board plant  Level 3  NQF Level 03  10 
    Elective  117298  Set up and operate board cross-cutting / trimming facilities in the dry processing area of veneer / plywood / block board plant  Level 3  NQF Level 03 
    Elective  117295  Set up and operate board edging and squaring facilties in the dry processing area of veneer / plywood / block board plant  Level 3  NQF Level 03 
    Elective  117310  Set up and operate drying facilities in wet processing area of veneer / plywood / block board plant  Level 3  NQF Level 03  10 
    Elective  117286  Set up and operate glue mixing, handling and storage facilities in dry processing area of veneer / plywood / block board plant  Level 3  NQF Level 03  10 
    Elective  117311  Set up and operate log debarking and conditioning facilities in wet processing area of veneer/plywood/block board plant  Level 3  NQF Level 03 
    Elective  117302  Set up and operate log handling, sorting and storage facilities (log yard / deck) in wet processing area of veneer/plywood/block board plant  Level 3  NQF Level 03  15 
    Elective  117305  Set up and operate peeling/ slicing facilities in wet processing area of veneer / plywood / block board plant  Level 3  NQF Level 03  10 
    Elective  117289  Set up and operate pressing facilities in dry processing area of veneer / plywood / block board plant  Level 3  NQF Level 03  10 
    Elective  117290  Set up and operate sanding facilties in the dry processing area of veneer / plywood / block board plant  Level 3  NQF Level 03  10 
    Elective  117312  Set up and operate veneer upgrading processing facilities in dry processing area of veneer/plywood/block board plant  Level 3  NQF Level 03  10 
    Elective  117202  Stack, load and palletise bags of charcoal and/or briquettes  Level 3  NQF Level 03  15 
    Elective  117200  Supervise loading of container  Level 3  NQF Level 03  25 
    Elective  117256  Supervise the wattle bark chopping operation  Level 3  NQF Level 03  20 
    Elective  117219  Assure quality in the fibreboard and chipboard manufacturing process  Level 4  NQF Level 04  20 
    Elective  117235  Demonstrate knowledge and understanding of the influence of wood structure, its properties and production factors on quality in a wood products environment  Level 4  NQF Level 04  15 
    Elective  117196  Fire kilns and chimneys  Level 4  NQF Level 04  30 
    Elective  117270  Inspect and quality assure timber roof truss products and documentation  Level 4  NQF Level 04  20 
    Elective  117273  Manage work force in relevant work areas in wood preservation plant  Level 4  NQF Level 04  15 


    LEARNING PROGRAMMES RECORDED AGAINST THIS QUALIFICATION: 
     
    NONE 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS QUALIFICATION: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. TAMASA TRAINING PTY LTD 
    2. TIRHANI SKILLSTRAINING PTY LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.