SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Ensure continuous supply of quality matchboxes to wrapping process 
SAQA US ID UNIT STANDARD TITLE
117253  Ensure continuous supply of quality matchboxes to wrapping process 
ORIGINATOR
SGB Wood Products 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Forestry and Wood Technology 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is for people who can inspect match boxes on the inspection table for any defects and reclaim as many boxes as possible, whilst adhering to other agreed standards pertaining to performance, safety, quality, and the environment.

People credited with this unit standard are able to:
  • Receive and inspect match boxes
  • Monitor process flow
  • Monitor quality of match boxes Monitor quality of match boxes 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    A Learner who wishes to enter a learning programme for this Unit Standard must be able to demonstrate:

    i) Competency in communication skills equivalent to that of a person who has qualified in these subjects at an ABET level 4;
    ii) An understanding of the basic activities of the match manufacturing production process in their workplace;
    iii) Knowledge and skills in the relevant workplace procedures, health and safety measures equivalent to NQF level 1 requirements. 

    UNIT STANDARD RANGE 
    24 box movement

    a) The scope of the Unit Standard covers:

    i) The whole environment that can be described as match manufacturing.
    ii) All the personnel involved in all activities of match manufacturing.
    iii) All the material that is handled and processed in this work area of match manufacturing.
    iv) All the company's work procedures and safety regulations relating to this work area of match manufacturing.
    v) All the relevant OSHACT stipulations, which have bearing on, match manufacturing and all other activities in this work area.

    b) The context of the Unit Standard relates to the training of a Learner at NQF level 2 in the activity of match manufacturing.

    c) The level assigned to this Unit Standard, i.e. Level 2, is appropriate because it entails the training of a novice in match manufacturing is a progression of the skills acquired from Levels 2 to 4. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Receive and inspect match boxes. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    There are sufficient inner and outer boxes for production as per production plans. 

    ASSESSMENT CRITERION 2 
    Inner and outer box's movements are checked to ensure that they nest freely and that they are not damaged or crushed as per quality specifications. 

    ASSESSMENT CRITERION 3 
    Box closer's are checked to ensure that they are operating properly as per quality specifications. 

    ASSESSMENT CRITERION 4 
    Workplace is cleaned during cleaning time as per work instructions. 

    ASSESSMENT CRITERION 5 
    Splints are removed from the main drive pit during cleaning time as per work instructions. 

    SPECIFIC OUTCOME 2 
    Monitor process flow. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Machine stops are monitored, causes identified and the relevant person informed as per work instructions. 

    ASSESSMENT CRITERION 2 
    Machine is stopped to be cleaned when waste build up interferes with production as per working instructions. 

    ASSESSMENT CRITERION 3 
    All safety standards are adhered to as per safe working practices. 

    SPECIFIC OUTCOME 3 
    Monitor quality of match boxes. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Boxes with defects are discarded into waste bin as per work instructions. 

    ASSESSMENT CRITERION 2 
    Inner boxes without covers are reclaimed and replaced on the inspection table as per work instructions. 

    ASSESSMENT CRITERION 3 
    Outer boxes without Inners are reclaimed and replaced on the inspection table as per work instructions. 

    ASSESSMENT CRITERION 4 
    Types of defects and damages are identified and the Team Leader is informed as per working instructions. 
    ASSESSMENT CRITERION RANGE 
    Box damage, poor printing, low match counts, small/big or no heads, no ignition strip
     

    ASSESSMENT CRITERION 5 
    Recurring defects are monitored and reported to the Team Leader. 
    ASSESSMENT CRITERION RANGE 
    Box damage, poor printing, low match counts, small/big or no heads, no ignition strip.
     

    ASSESSMENT CRITERION 6 
    Matchboxes are inspected on the inspection table for dirty or damaged boxes and those with visibly low match counts as per quality specifications. 

    ASSESSMENT CRITERION 7 
    Damaged boxes and boxes with protruding matches are not allowed to pass to the VAT machine as per quality requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    An individual who wishes to be assessed against this Unit Standard may apply to, or inform, his immediate superior in the relevant workplace, to request management to arrange for his / her assessment by the relevant assessor accredited for this purpose by the ETQA of the FIETA. Accreditation for this Unit Standard shall be from the relevant Education and Training Quality Assurer (FIETA ETQA) through formative and summative assessment by a registered Assessor. Assessment should be contextual and be conducted in the workplace as far as possible.

    The relevant NSB and SGB should be notified of any feedback related to this qualification.
  • Assessors must be registered as an Assessor with the relevant ETQA
  • Moderators must be registered as assessors with the relevant ETQA
  • Training providers must be accredited by the relevant ETQA
  • Moderation should include both internal and external moderation where applicable
  • The FIETA ETQA will co-ordinate all moderation activities in accordance with their policies and procedures 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    A demonstrated understanding of:

    Match manufacturing principles and practical application in the match manufacturing environment, in addition with knowledge of Safety/Environmental/Health issues.

    i) Quality - ISO Awareness
    ii) Safe Work Procedures
    iii) Section 14
    iv) Production Processes 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems, using critical and creative thinking in the match manufacturing area. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organization or community in a production environment. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, clean, store and deliver tools and instruments utilized in his/her work area in an effective and efficient manner. 

    UNIT STANDARD CCFO COMMUNICATING 
    Listen, understand instructions and verbally report in an effective manner to his/her superior. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    The Outcomes that Learners achieve will be judged subject to these being achieved:

    i) Within the standard time prescribed by the organisation;
    ii) While following all the safety procedures required by the OSHACT and the workplace; and
    iii) Strictly according to the organisation's work instructions

    Values

    The use of tasks and materials in the learning event plan should not discriminate against learners on any grounds prescribed in the Bill of Rights and Employment Equity Act and should promote the orientations outlined in the critical cross-field outcomes. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49082   GETC: Wood Products Processing  Level 1  NQF Level 01  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  FPMSETA 
    Elective  49083   National Certificate: Wood Products Processing  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. AFRICAN MULTISKILLS DEVELOPMENT AND TRAINING 
    2. ENB TRAINING SERVICEPTYLTD 
    3. FUTURE DISCOVERY TRAINING ACADEMY 
    4. Imara Umbono Incorporated (Pty) Ltd 
    5. Longata Consultant 
    6. MGS GCABA CONTRACTING & TRADING CC 
    7. Optimi Workplace 
    8. PINUS TECH TECHNOLOGIES TRADING AND PROJECTS 
    9. Silungokuhle (Pty) Ltd 
    10. TAMASA TRAINING PTY LTD 
    11. TIRHANI SKILLSTRAINING PTY LTD 
    12. VEB CELE & ASSOCIATES PTY LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.