All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: |
Perform Basic Infrastructural Maintenance |
SAQA US ID | UNIT STANDARD TITLE | |||
8328 | Perform Basic Infrastructural Maintenance | |||
ORIGINATOR | ||||
SGB Nature Conservation | ||||
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
- | ||||
FIELD | SUBFIELD | |||
Field 01 - Agriculture and Nature Conservation | Nature Conservation | |||
ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
Undefined | Regular | Level 2 | NQF Level 02 | 12 |
REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
Passed the End Date - Status was "Reregistered" |
2004-12-02 | 2007-12-02 | SAQA 1657/04 | |
LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
2008-12-02 | 2011-12-02 |
In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard does not replace any other unit standard and is not replaced by any other unit standard. |
PURPOSE OF THE UNIT STANDARD |
The learner assessed as competent against this unit standard will be able to maintain basic infrastructure usually found in conserved areas (simple accommodation, garages, ablution blocks, entrance gates, boreholes, windmills, pumps, track and trail, etc). This competence enables the qualifying learner to maintain and construct infrastructure under supervision, thereby enhancing tourism, and the management of the area. Achieving this unit standard will enhance employability of the learner in both Conservation and other construction industry related jobs. |
LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
First Aid and OHS. |
UNIT STANDARD RANGE |
Guides to the scope and complexity of the specific outcomes and essential embedded knowledge are provided in bullet points beneath each. These are prefaced by "for example" since they are neither comprehensive nor necessarily appropriate to all contexts. Alternatives must however be comparable in scope and complexity.
These are intended only as a general guide to scope and complexity of what is required. |
Specific Outcomes and Assessment Criteria: |
SPECIFIC OUTCOME 1 |
Identify levels of expected maintenance of infrastructure. |
OUTCOME RANGE |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.
They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge. As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment. The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent. METHOD OF ASSESSMENT Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation. A range of assessment methods should be used, including: Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions Product sample - examine the outcomes previously produced by the practitioner Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment Questioning (verbal or written) - ask relevant questions linked to the unit standard Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party) Integrated assessment It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'. |
SPECIFIC OUTCOME 2 |
Assess existing infrastructure against agreed standards |
OUTCOME RANGE |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.
They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge. As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment. The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent. METHOD OF ASSESSMENT Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation. A range of assessment methods should be used, including: Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions Product sample - examine the outcomes previously produced by the practitioner Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment Questioning (verbal or written) - ask relevant questions linked to the unit standard Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party) Integrated assessment It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'. |
SPECIFIC OUTCOME 3 |
Carry out continuous maintenance or repairs of infrastructure where authorised and competent. |
OUTCOME NOTES |
Carry out continuous maintenance or repairs of infrastructure where authorised and competent to do so |
OUTCOME RANGE |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.
They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge. As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment. The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent. METHOD OF ASSESSMENT Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation. A range of assessment methods should be used, including: Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions Product sample - examine the outcomes previously produced by the practitioner Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment Questioning (verbal or written) - ask relevant questions linked to the unit standard Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party) Integrated assessment It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'. |
SPECIFIC OUTCOME 4 |
Refer repairs or maintenance where unauthorised or unskilled to deal with them. |
OUTCOME RANGE |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.
They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge. As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment. The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent. METHOD OF ASSESSMENT Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation. A range of assessment methods should be used, including: Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions Product sample - examine the outcomes previously produced by the practitioner Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment Questioning (verbal or written) - ask relevant questions linked to the unit standard Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party) Integrated assessment It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'. |
SPECIFIC OUTCOME 5 |
Make suggestions to improve future maintenance of infrastucture. |
OUTCOME RANGE |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.
They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge. As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment; formative and summative assessment. The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a practitioner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a practitioner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent. METHOD OF ASSESSMENT Assessment should include practical demonstration of competence, either in the workplace or through work-realistic, out-of-classroom simulation. A range of assessment methods should be used, including: Direct observation - watch the practitioner carry out the task or produce a desired outcome during the course of his or her normal work under normal workplace conditions Product sample - examine the outcomes previously produced by the practitioner Simulation of a specific task - set a specific task for the practitioner to demonstrate in a simulated environment Questioning (verbal or written) - ask relevant questions linked to the unit standard Testimony - collect a portfolio of evidence from suitable people (eg: reports from a third party) Integrated assessment It may be more effective and efficient to assess a number of unit standards together thus reducing the overall number of assessment 'events'. |
UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution which is accredited by the relevant ETQA. |
UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
The qualifying learner is able to demonstrate a basic knowledge and understanding of:
Depending on the context of practice of this unit standard, knowledge required will cover a wide range. Below are some examples of specifics that may be required in different circumstances. |
Critical Cross-field Outcomes (CCFO): |
UNIT STANDARD CCFO IDENTIFYING |
Problem solving relates to the following specific outcomes:
Identify levels of expected maintenance of infrastructure. Assess existing infrastructure against agreed standards. Carry out continuous maintenance or repairs of infrastructure where authorised and competent to do so. Refer repairs or maintenance where unauthorised or unskilled to deal with them. Make suggestions to improve future maintenance of infrastructure. |
UNIT STANDARD CCFO WORKING |
Teamwork relates to the following specific outcomes:
Identify levels of expected maintenance of infrastructure. Assess existing infrastructure against agreed standards. Carry out continuous maintenance or repairs of infrastructure where authorised and competent to do so. Refer repairs or maintenance where unauthorised or unskilled to deal with them. Make suggestions to improve future maintenance of infrastructure. |
UNIT STANDARD CCFO ORGANISING |
Self-organization and self-management relates to the following specific outcomes:
Assess existing infrastructure against agreed standards. Carry out continuous maintenance or repairs of infrastructure where authorised and competent to do so. Refer repairs or maintenance where unauthorised or unskilled to deal with them. Make suggestions to improve future maintenance of infrastructure. |
UNIT STANDARD CCFO COLLECTING |
Informaion evaluation relates to the following specific outcomes:
Assess existing infrastructure against agreed standards. Carry out continuous maintenance or repairs of infrastructure where authorised and competent to do so. Refer repairs or maintenance where unauthorised or unskilled to deal with them. Make suggestions to improve future maintenance of infrastructure. |
UNIT STANDARD CCFO COMMUNICATING |
Communication relates to the following specific outcomes:
Identify levels of expected maintenance of infrastructure. Assess existing infrastructure against agreed standards. Carry out continuous maintenance or repairs of infrastructure where authorised and competent to do so. Refer repairs or maintenance where unauthorised or unskilled to deal with them. Make suggestions to improve future maintenance of infrastructure. |
UNIT STANDARD CCFO SCIENCE |
Use of science and technology relates to the following specific outcomes:
Carry out continuous maintenance or repairs of infrastructure where authorised and competent to do so. Refer repairs or maintenance where unauthorised or unskilled to deal with them. Make suggestions to improve future maintenance of infrastructure. |
UNIT STANDARD CCFO DEMONSTRATING |
Inter-relatedness of systems relates to the following specific outcomes:
Identify levels of expected maintenance of infrastructure. Assess existing infrastructure against agreed standards. Carry out continuous maintenance or repairs of infrastructure where authorised and competent to do so. Refer repairs or maintenance where unauthorised or unskilled to deal with them. Make suggestions to improve future maintenance of infrastructure. |
UNIT STANDARD NOTES |
Values:
Demonstration of the knowledge and skills outlined in this unit standard must be consistent with the principles of: Supplementary information: |
QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
Core | 22971 | General Education and Training Certificate: Conservation | Level 1 | NQF Level 01 | Passed the End Date - Status was "Reregistered" |
2012-06-30 | CATHSSETA |
Core | 20415 | National Certificate: Conservation Resource Guardianship | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2008-02-06 | Was CATHSSETA until Last Date for Achievement |
PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
NONE |
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |