SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Batch coins and tokens 
SAQA US ID UNIT STANDARD TITLE
7894  Batch coins and tokens 
ORIGINATOR
SGB Hospitality,Tourism,Travel, Leisure and Gaming 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 11 - Services Hospitality, Tourism, Travel, Gaming and Leisure 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2007-01-23  2008-09-17  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2009-09-17   2012-09-17  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
258037  Batch coins and tokens  Level 2  NQF Level 02   

PURPOSE OF THE UNIT STANDARD 
Each learner must understand the terms batch and rack as well as the wrap or batch standards for coins and tokens and the importance of following these standards. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
None 

UNIT STANDARD RANGE 
Range statements are included with specific outcomes as necessary. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Describe verification and batching procedures. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
1. Arrange or create an environment in which the learner can be fairly assessed against the outcomes. 
ASSESSMENT CRITERION NOTES 
  • This unit standard must be assessed in the workplace or a realistic working environment.
  • This unit could be assessed in isolation. 

  • ASSESSMENT CRITERION 2 
    2. Evaluate the learner's ability to meet the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit can be assessed by a combination of observation, questioning and testimonies from third parties, but the emphasis is to be on observation.
  • Observation must occur with batching procedures.
  • Question variances, discrepancies and deviations from procedure. 

  • ASSESSMENT CRITERION 3 
    3. Use surveillance target reports as an additional assessment tool where necessary. 

    ASSESSMENT CRITERION 4 
    4. Provide specific feedback to the learner on assessments and the learner's ability to meet the outcomes. 

    ASSESSMENT CRITERION 5 
    5. Complete the declaration of competence and inform the appropriate ETQA once the learner has demonstrated the ability to meet all the outcomes. 

    ASSESSMENT CRITERION 6 
    6. Counsel the learner on future assessments, necessary learning and further qualifications. 

    SPECIFIC OUTCOME 2 
    Explain the reasons for batching loose coins or tokens and describe the process. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Arrange or create an environment in which the learner can be fairly assessed against the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit standard must be assessed in the workplace or a realistic working environment.
  • This unit could be assessed in isolation. 

  • ASSESSMENT CRITERION 2 
    2. Evaluate the learner's ability to meet the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit can be assessed by a combination of observation, questioning and testimonies from third parties, but the emphasis is to be on observation.
  • Observation must occur with batching procedures.
  • Question variances, discrepancies and deviations from procedure. 

  • ASSESSMENT CRITERION 3 
    3. Use surveillance target reports as an additional assessment tool where necessary. 

    ASSESSMENT CRITERION 4 
    4. Provide specific feedback to the learner on assessments and the learner's ability to meet the outcomes. 

    ASSESSMENT CRITERION 5 
    5. Complete the declaration of competence and inform the appropriate ETQA once the learner has demonstrated the ability to meet all the outcomes. 

    ASSESSMENT CRITERION 6 
    6. Counsel the learner on future assessments, necessary learning and further qualifications. 

    SPECIFIC OUTCOME 3 
    Explain the necessity of two parties agreeing on the accuracy of the verification & batch procedures 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Arrange or create an environment in which the learner can be fairly assessed against the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit standard must be assessed in the workplace or a realistic working environment.
  • This unit could be assessed in isolation. 

  • ASSESSMENT CRITERION 2 
    2. Evaluate the learner's ability to meet the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit can be assessed by a combination of observation, questioning and testimonies from third parties, but the emphasis is to be on observation.
  • Observation must occur with batching procedures.
  • Question variances, discrepancies and deviations from procedure. 

  • ASSESSMENT CRITERION 3 
    3. Use surveillance target reports as an additional assessment tool where necessary. 

    ASSESSMENT CRITERION 4 
    4. Provide specific feedback to the learner on assessments and the learner's ability to meet the outcomes. 

    ASSESSMENT CRITERION 5 
    5. Complete the declaration of competence and inform the appropriate ETQA once the learner has demonstrated the ability to meet all the outcomes. 

    ASSESSMENT CRITERION 6 
    6. Counsel the learner on future assessments, necessary learning and further qualifications. 

    SPECIFIC OUTCOME 4 
    Explain interrelationships. 
    OUTCOME NOTES 
    Explain the interrelationship between accurate batching of coins, checking contents of any issued float, cashier balance. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Arrange or create an environment in which the learner can be fairly assessed against the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit standard must be assessed in the workplace or a realistic working environment.
  • This unit could be assessed in isolation. 

  • ASSESSMENT CRITERION 2 
    2. Evaluate the learner's ability to meet the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit can be assessed by a combination of observation, questioning and testimonies from third parties, but the emphasis is to be on observation.
  • Observation must occur with batching procedures.
  • Question variances, discrepancies and deviations from procedure. 

  • ASSESSMENT CRITERION 3 
    3. Use surveillance target reports as an additional assessment tool where necessary. 

    ASSESSMENT CRITERION 4 
    4. Provide specific feedback to the learner on assessments and the learner's ability to meet the outcomes. 

    ASSESSMENT CRITERION 5 
    5. Complete the declaration of competence and inform the appropriate ETQA once the learner has demonstrated the ability to meet all the outcomes. 

    ASSESSMENT CRITERION 6 
    6. Counsel the learner on future assessments, necessary learning and further qualifications. 

    SPECIFIC OUTCOME 5 
    Describe the procedure to be followed when foreign objects are discovered. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Arrange or create an environment in which the learner can be fairly assessed against the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit standard must be assessed in the workplace or a realistic working environment.
  • This unit could be assessed in isolation. 

  • ASSESSMENT CRITERION 2 
    2. Evaluate the learner's ability to meet the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit can be assessed by a combination of observation, questioning and testimonies from third parties, but the emphasis is to be on observation.
  • Observation must occur with batching procedures.
  • Question variances, discrepancies and deviations from procedure. 

  • ASSESSMENT CRITERION 3 
    3. Use surveillance target reports as an additional assessment tool where necessary. 

    ASSESSMENT CRITERION 4 
    4. Provide specific feedback to the learner on assessments and the learner's ability to meet the outcomes. 

    ASSESSMENT CRITERION 5 
    5. Complete the declaration of competence and inform the appropriate ETQA once the learner has demonstrated the ability to meet all the outcomes. 

    ASSESSMENT CRITERION 6 
    6. Counsel the learner on future assessments, necessary learning and further qualifications. 

    SPECIFIC OUTCOME 6 
    Describe transportation and storage procedure of batched coins and tokens. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Arrange or create an environment in which the learner can be fairly assessed against the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit standard must be assessed in the workplace or a realistic working environment.
  • This unit could be assessed in isolation. 

  • ASSESSMENT CRITERION 2 
    2. Evaluate the learner's ability to meet the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit can be assessed by a combination of observation, questioning and testimonies from third parties, but the emphasis is to be on observation.
  • Observation must occur with batching procedures.
  • Question variances, discrepancies and deviations from procedure. 

  • ASSESSMENT CRITERION 3 
    3. Use surveillance target reports as an additional assessment tool where necessary. 

    ASSESSMENT CRITERION 4 
    4. Provide specific feedback to the learner on assessments and the learner's ability to meet the outcomes. 

    ASSESSMENT CRITERION 5 
    5. Complete the declaration of competence and inform the appropriate ETQA once the learner has demonstrated the ability to meet all the outcomes. 

    ASSESSMENT CRITERION 6 
    6. Counsel the learner on future assessments, necessary learning and further qualifications. 

    SPECIFIC OUTCOME 7 
    Batch coins and tokens correctly, following all procedures. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Arrange or create an environment in which the learner can be fairly assessed against the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit standard must be assessed in the workplace or a realistic working environment.
  • This unit could be assessed in isolation. 

  • ASSESSMENT CRITERION 2 
    2. Evaluate the learner's ability to meet the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit can be assessed by a combination of observation, questioning and testimonies from third parties, but the emphasis is to be on observation.
  • Observation must occur with batching procedures.
  • Question variances, discrepancies and deviations from procedure. 

  • ASSESSMENT CRITERION 3 
    3. Use surveillance target reports as an additional assessment tool where necessary. 

    ASSESSMENT CRITERION 4 
    4. Provide specific feedback to the learner on assessments and the learner's ability to meet the outcomes. 

    ASSESSMENT CRITERION 5 
    5. Complete the declaration of competence and inform the appropriate ETQA once the learner has demonstrated the ability to meet all the outcomes. 

    ASSESSMENT CRITERION 6 
    6. Counsel the learner on future assessments, necessary learning and further qualifications. 

    SPECIFIC OUTCOME 8 
    Identify the problem causing a discrepancy during the batching procedure. 
    OUTCOME NOTES 
    Identify the problem causing a discrepancy during the batching procedure, and describe the appropriate steps to rectify the problem. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Arrange or create an environment in which the learner can be fairly assessed against the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit standard must be assessed in the workplace or a realistic working environment.
  • This unit could be assessed in isolation. 

  • ASSESSMENT CRITERION 2 
    2. Evaluate the learner's ability to meet the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit can be assessed by a combination of observation, questioning and testimonies from third parties, but the emphasis is to be on observation.
  • Observation must occur with batching procedures.
  • Question variances, discrepancies and deviations from procedure. 

  • ASSESSMENT CRITERION 3 
    3. Use surveillance target reports as an additional assessment tool where necessary. 

    ASSESSMENT CRITERION 4 
    4. Provide specific feedback to the learner on assessments and the learner's ability to meet the outcomes. 

    ASSESSMENT CRITERION 5 
    5. Complete the declaration of competence and inform the appropriate ETQA once the learner has demonstrated the ability to meet all the outcomes. 

    ASSESSMENT CRITERION 6 
    6. Counsel the learner on future assessments, necessary learning and further qualifications. 

    SPECIFIC OUTCOME 9 
    Make suggestions on ways to improve the batching process. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    1. Arrange or create an environment in which the learner can be fairly assessed against the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit standard must be assessed in the workplace or a realistic working environment.
  • This unit could be assessed in isolation. 

  • ASSESSMENT CRITERION 2 
    2. Evaluate the learner's ability to meet the outcomes. 
    ASSESSMENT CRITERION NOTES 
  • This unit can be assessed by a combination of observation, questioning and testimonies from third parties, but the emphasis is to be on observation.
  • Observation must occur with batching procedures.
  • Question variances, discrepancies and deviations from procedure. 

  • ASSESSMENT CRITERION 3 
    3. Use surveillance target reports as an additional assessment tool where necessary. 

    ASSESSMENT CRITERION 4 
    4. Provide specific feedback to the learner on assessments and the learner's ability to meet the outcomes. 

    ASSESSMENT CRITERION 5 
    5. Complete the declaration of competence and inform the appropriate ETQA once the learner has demonstrated the ability to meet all the outcomes. 

    ASSESSMENT CRITERION 6 
    6. Counsel the learner on future assessments, necessary learning and further qualifications. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    1. Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.

    2. Any institution offering learning that will enable achievement of this unit standard must be registered with the FE/HE Registrar.

    3. Any institution wishing to receive skill development grants must be accredited with the relevant ETQA. Such an institution will also be registered with the relevant SETA.

    4. Moderation of assessment will be done by the relevant ETQA at its discretion. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Essential embedded knowledge is dealt with under the specific outcomes section where "demonstrated knowledge and understanding" is required. 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems - relates to the following outcomes:
  • Describe the procedure to be followed when foreign objects are discovered.
  • Identify the problem causing a discrepancy during the batching procedure, and describe the appropriate steps to rectify the problem.
  • Make suggestions on ways to improve the batching process. 

  • UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 258037, which is "Batch coins and tokens", Level 2, 3 credits.

    Recommendations and Exemplars for the design of:

    Learning / Curriculum
  • Learning should include involvement in the weigh and batching process on a daily basis.
  • The learner should be able to check for deviations from procedures and follow all reporting procedures for variances/ discrepancies.
  • The learner should familiarise him/ her self with the Gaming, provincial, company procedure for the weigh and batching process.

    Performance systems
    Ongoing measurement of the learner's ability to meet this standard is recommended. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  14117   National Certificate: Gaming Cashiering  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2008-09-17  Was CATHSSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.