SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Establish a survey point 
SAQA US ID UNIT STANDARD TITLE
254505  Establish a survey point 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are responsible for installing survey points in any underground environment.

People credited with this unit standard are able to:
  • Prepare to install a survey point.
  • Locate the position of the survey point.
  • Install the survey point.
  • Complete the work sequence.

    The skills, knowledge and understanding demonstrated within this unit standard are essential for the social and economic transformation and contribute to the upliftment and economic growth of the mining and minerals sector.

    This unit standard is intended to promote general skills, knowledge and demonstrating an understanding of the installation of survey points the mining and minerals sector in order to ensure knowledgeable and informed workers. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credit calculation is based on the assumption that learners are already competent in terms of the following outcomes or areas of learning when starting to learn towards this unit standard:
  • Communication and Mathematical literacy at NQF Level 1. 

  • UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Prepare to establish a survey point. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools and equipment required for the task are verified for use in accordance with manufacturers' specifications. 

    ASSESSMENT CRITERION 2 
    Personal protective equipment required for the task is verified for use in accordance with manufacturers' specifications. 

    ASSESSMENT CRITERION 3 
    Permission to enter the work place, if necessary, is obtained in accordance with task specific requirements. 

    ASSESSMENT CRITERION 4 
    Workplace hazards and sub-standard conditions are explained and, if found during continuous examination, dealt with in accordance with task specific requirements. 

    ASSESSMENT CRITERION 5 
    The consequences of non-compliance are explained in terms of impact on people, mining infrastructure and production. 

    SPECIFIC OUTCOME 2 
    Locate the position of the survey point. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Work related hazards and associated risks are explained and identified, and if found, dealt with in accordance with legal and task specific requirements. 

    ASSESSMENT CRITERION 2 
    Personal protective equipment is used throughout in accordance with manufacturers' specifications. The consequences of non-compliance are explained. 

    ASSESSMENT CRITERION 3 
    Required position of the survey point5 is located in accordance with the job and surveyor's instructions. 
    ASSESSMENT CRITERION RANGE 
    Required position includes positions selected at random and pre-determined positions.
     

    ASSESSMENT CRITERION 4 
    Communicated instructions are interpreted and responded to in accordance with task specific requirements. 
    ASSESSMENT CRITERION RANGE 
    Communicated instructions include instructions by means of hand signals, verbal communication, radio transmission, cellular phone.
     

    ASSESSMENT CRITERION 5 
    Evidence is required of hand signals and any two (2) of the other communication methods. 

    ASSESSMENT CRITERION 6 
    The consequences of non-compliance are explained in terms of impact on people, mining infrastructure and production. 

    SPECIFIC OUTCOME 3 
    Install the survey point. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Survey point is installed in accordance with task specific requirements. 
    ASSESSMENT CRITERION RANGE 
    Install includes hammering in a marker and constructing a semi-permanent structure containing the survey point.
     

    ASSESSMENT CRITERION 2 
    Survey point is marked in accordance with task specific requirements. 

    ASSESSMENT CRITERION 3 
    The importance of establishing survey points is explained. 

    SPECIFIC OUTCOME 4 
    Complete the work sequence. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools and equipment are collected and accounted for before leaving the work place in accordance with operational requirements. 

    ASSESSMENT CRITERION 2 
    Tools and equipment are maintained in accordance with manufacturers' specifications. 

    ASSESSMENT CRITERION 3 
    Tools and equipment found defective are dealt with in accordance with managerial instructions. 

    ASSESSMENT CRITERION 4 
    Reporting requirements are dealt with in accordance with managerial instructions. 

    ASSESSMENT CRITERION 5 
    The importance of completing the work sequence is explained. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against the qualification must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this qualification must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described in the associated unit standards.
  • Anyone wishing to be assessed against this qualification may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA.
  • Guidelines and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • Basic principles associated with surveying.
  • Procedures for installing survey points.
  • Hazardous and sub-standard conditions.
  • Procedure for marking-off of survey point positions.
  • Procedure to install and mark survey points.
  • Procedure to position and install survey point.
  • Survey Codes of Practice. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.
  • Note: The ability of the candidate to identify sub-standard and hazardous conditions, assess and take appropriate action. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.
  • Note: The ability and willingness of the candidate to accept and interpret work instructions correctly. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.
  • Note: The ability of the candidate to indicate what methods, tools and personal protective equipment is required and communicate to fellow workers his/her intentions and assistance required. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.
  • Note: The ability of the candidate to reconcile the information from visual and physical examinations and constantly evaluate the changing situation. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.
  • Note: The appropriate communication with the relevant personnel with regard to the reporting of hazards and sub-standard conditions will indicate his/her proficiency in effective communication. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.
  • Note: The correct use of scientific nomenclature and technological knowledge will indicate that the candidate is proficient in the use of science and technology. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.
  • Note: The ability of the candidate to identify and refer anomalous behaviour to a specialist confirms understanding that a specific observation, inference, action or decision can have a devastating effect. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Terminology:

    Specified Requirements:

    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health and Safety Act (Act 29 of 1996), and Minerals Act and Regulations (Act 50 of 1991).
  • Regulations.
  • Mandatory Codes of Practice.
  • South African Bureau of Standards and other standards.
  • Chief Inspector of Mines' directives.

    Site Specific:
  • Hazard identification and Risk Assessment (HISA).
  • Occupational Health and Safety Risk Assessment Management Programme.
  • Voluntary Codes of Practice.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of recorded OH&S Risks.
  • Working Guides.
  • Equipment and Materials Specifications.

    Other Terms:

    Tools and equipment:
  • This means, but is not limited to stakes, hammers, markers, tapes.

    Workplace:
  • Includes survey stations, temporary beacons, markers, marks, surface features.

    Hazardous and sub-standard conditions:
  • This means, but is not limited to highwalls, undermined ground, snakes, strong wind, loose ground, wet/muddy conditions, skew beacons.

    Work related hazards and associated risks:
  • This means, but is not limited to traffic, overhead power lines, water, working at elevated positions, veld fires.

    Marking:
  • This means, but is not limited to, the use of paint, chalk and tape.

    Personal Protective Equipment:
  • Include, but is not limited to, hearing protection, hard hat, safety footwear, eye protection, hand protection, life lines.

    Surveyors Instructions:
  • This means locating a survey point to task specific accuracies. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  60349   National Certificate: Mining Technical Support  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. CADDIS TRADING CC 
    2. MATHOME TRAINING AND DEVELOPMENT (PTY) LTD 
    3. PALABORA COPPER (PTY) LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.