SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Use and maintain specialised tools in the manufacturing and installation of aluminium products 
SAQA US ID UNIT STANDARD TITLE
230062  Use and maintain specialised tools in the manufacturing and installation of aluminium products 
ORIGINATOR
SGB Building Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Building Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners who are assessed as competent against this unit standard will be able to understand the use, care and provide basic maintenance of specialised tools in the manufacturing and installation of aluminium products.

This will ensure that breakages and stoppages are kept to a minimum and equipment is used in accordance with safe work practices. This competence will advance the learner's own expertise and employability in both the construction sector and other related jobs. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
This unit standard assumes that learners are already competent in:
  • Communication at NQF Level 1.
  • Mathematical Literacy at NQF Level 1. 

  • UNIT STANDARD RANGE 
    Specialised hand tools:
  • Crimper.

    Specialised Pneumatic tools:
  • Pneumatic Crimper.
  • Pneumatic Drill.
  • Pneumatic Pop riveters.
  • Pneumatic Screw driver.
  • Pneumatic Mini grinders.
  • Pneumatic Grinders.
  • Pneumatic Sand blasting. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Handle and care for specialised tools. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The use and application of each tool is explained in accordance with procedures. 

    ASSESSMENT CRITERION 2 
    The components of each tool are identified from the rest. 

    ASSESSMENT CRITERION 3 
    Specialised tools are handled with due regard to safety. 

    ASSESSMENT CRITERION 4 
    Tools are cleaned, checked and maintained within own scope of responsibility. 

    ASSESSMENT CRITERION 5 
    Damaged or worn tools are reported according to procedure. 

    SPECIFIC OUTCOME 2 
    Use specialised tools in manufacturing aluminium components. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Appropriate tools are selected and inspected for use. 

    ASSESSMENT CRITERION 2 
    Tools are prepared for use if necessary to meet task requirements. 

    ASSESSMENT CRITERION 3 
    Each of the specialised tools is used to complete a variety of tasks in accordance with requirements. 
    ASSESSMENT CRITERION RANGE 
    Use includes correct holding of tools while working, correct application of the tool and correct placement of tools on work surface.
     


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this Unit Standard must be registered as an assessor with the relevant ETQA or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this Unit Standard must be accredited as a provider with the relevant ETQA or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments at exit points of the Qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual Unit Standards as well as the integrated competence described in the Qualification.
  • Anyone wishing to be assessed against this Unit Standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Qualifying learners understand and can explain:
  • The components of specialised tools.
  • The use and application of each tool.
  • The safety precautions relating to each tool.
  • The efficient use of each tool.
  • Adherence to proper safety procedures.
  • Adherence to proper housekeeping guidelines. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage oneself and one's activities responsibly and effectively, while working with specialised tools. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, by applying specialised tools effectively and taking appropriate care of these specialised tools while showing responsibility towards the environment and safety of self and others. 

    UNIT STANDARD CCFO DEMONSTRATING 
    The learner is able to demonstrate an understanding of the world as a set of related systems by recognising that he does not exist in isolation and that his actions have an effect on the world around him. 

    UNIT STANDARD CCFO CONTRIBUTING 
    The learner is able to contribute to the full personal development of themselves and the social and economic development of the society at large. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  57162   National Certificate: Aluminium Fabrication and Installation  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.