All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.

SOUTH AFRICAN QUALIFICATIONS AUTHORITY

REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE:

Dismantle vehicle components

SAQA US ID	UNIT STANDARD TITLE
15125	Dismantle vehicle components
ORIGINATOR
SGB Vehicle Maintenance
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-
FIELD			SUBFIELD
Field 06 - Manufacturing, Engineering and Technology			Manufacturing and Assembly
ABET BAND	UNIT STANDARD TYPE	PRE-2009 NQF LEVEL	NQF LEVEL	CREDITS
Undefined	Regular	Level 2	NQF Level 02	6
REGISTRATION STATUS		REGISTRATION START DATE	REGISTRATION END DATE	SAQA DECISION NUMBER
Passed the End Date - Status was "Reregistered"		2007-08-07	2010-08-07	SAQA 0160/05
LAST DATE FOR ENROLMENT		LAST DATE FOR ACHIEVEMENT
2011-08-07		2014-08-07

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.

This unit standard does not replace any other unit standard and is not replaced by any other unit standard.

PURPOSE OF THE UNIT STANDARD

People in the field of manufacturing and engineering require the skills, values and knowledge reflected in this unit standard. The learning outcomes in this unit standard also contribute to the exit level outcomes required for various manufacturing and engineering qualifications. The learner is capable of identify and dismantle components that need to be inspected and evaluated by a competent person and know how to process the ordering of new parts. This will contribute to the exit level outcomes required for the National Certificate in servicing vehicles and related qualification.

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING

This unit standard has been designed as part of a progression. It is one of a series of unit standards for servicing vehicles in the field of manufacturing and engineering. It is assumed that the learner has already learned the use of engineering hand tools, power tools, and measuring equipment and to maintain a safe and productive working environment.

UNIT STANDARD RANGE

The ranges as indicated under the specific outcomes determine the scope and level of this unit standard. All work is performed under the supervision and according to workplace and workshop manual specifications and occupational safety, health and environmental legislation.

Specific Outcomes and Assessment Criteria:

SPECIFIC OUTCOME 1

Plan the procedure and prepare the component and workplace.

OUTCOME RANGE

Plan the procedure includes obtaining task instructions, workshop manuals and determine a sequence of performances to dismantle component Planning also include the identification of the tools, equipment and personal protective equipment Prepare the component and workplace includes the cleaning and positioning of the component and the workplace is prepared in accordance with workplace procedures

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Results achieved Component is prepared and cleaned Component is dismantled Component parts are prepared for inspection and evaluation Work area restored, tools and equipment are stored Documentation completed and processed Indicators Task instructions and workshop manuals are obtained and interpreted The appropriate dismantling procedures are determined The appropriate tools and equipment are identified and obtained The component is cleaned, prepared and dismantled in accordance with the workshop manual procedures and flat rate schedule Components parts are cleaned and laid out in order of dismantling for inspection and evaluation Identified unserviceable and serviceable parts are processed in accordance with workshop and quality procedures Replacement parts are ordered in accordance with workplace procedures Documentation is completed and processed Adhered to SHE procedures throughout dismantling task Understanding confirmed Respond to `what if` and `why` questions covering: Reasons for laying out parts in sequence of dismantling Demonstrate an understanding of the procedures for processing unserviceable parts

SPECIFIC OUTCOME 2

Dismantle component and prepare for inspection and evaluation.

OUTCOME RANGE

Dismantling includes all components but excludes engines, transmissions, transfer cases and differentials Prepare the parts for inspection and evaluation by a competent person

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Results achieved Component is prepared and cleaned Component is dismantled Component parts are prepared for inspection and evaluation Work area restored, tools and equipment are stored Documentation completed and processed Indicators Task instructions and workshop manuals are obtained and interpreted The appropriate dismantling procedures are determined The appropriate tools and equipment are identified and obtained The component is cleaned, prepared and dismantled in accordance with the workshop manual procedures and flat rate schedule Components parts are cleaned and laid out in order of dismantling for inspection and evaluation Identified unserviceable and serviceable parts are processed in accordance with workshop and quality procedures Replacement parts are ordered in accordance with workplace procedures Documentation is completed and processed Adhered to SHE procedures throughout dismantling task Understanding confirmed Respond to `what if` and `why` questions covering: Reasons for laying out parts in sequence of dismantling Demonstrate an understanding of the procedures for processing unserviceable parts

SPECIFIC OUTCOME 3

Apply quality checks on completed work.

OUTCOME RANGE

Quality checks includes conformance to workshop manual, workplace and quality procedures.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Results achieved Component is prepared and cleaned Component is dismantled Component parts are prepared for inspection and evaluation Work area restored, tools and equipment are stored Documentation completed and processed Indicators Task instructions and workshop manuals are obtained and interpreted The appropriate dismantling procedures are determined The appropriate tools and equipment are identified and obtained The component is cleaned, prepared and dismantled in accordance with the workshop manual procedures and flat rate schedule Components parts are cleaned and laid out in order of dismantling for inspection and evaluation Identified unserviceable and serviceable parts are processed in accordance with workshop and quality procedures Replacement parts are ordered in accordance with workplace procedures Documentation is completed and processed Adhered to SHE procedures throughout dismantling task Understanding confirmed Respond to `what if` and `why` questions covering: Reasons for laying out parts in sequence of dismantling Demonstrate an understanding of the procedures for processing unserviceable parts

SPECIFIC OUTCOME 4

Apply safety concepts.

OUTCOME RANGE

Safety concepts include working according to workplace safety and procedures and the use of personal protective equipment.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Results achieved Component is prepared and cleaned Component is dismantled Component parts are prepared for inspection and evaluation Work area restored, tools and equipment are stored Documentation completed and processed Indicators Task instructions and workshop manuals are obtained and interpreted The appropriate dismantling procedures are determined The appropriate tools and equipment are identified and obtained The component is cleaned, prepared and dismantled in accordance with the workshop manual procedures and flat rate schedule Components parts are cleaned and laid out in order of dismantling for inspection and evaluation Identified unserviceable and serviceable parts are processed in accordance with workshop and quality procedures Replacement parts are ordered in accordance with workplace procedures Documentation is completed and processed Adhered to SHE procedures throughout dismantling task Understanding confirmed Respond to `what if` and `why` questions covering: Reasons for laying out parts in sequence of dismantling Demonstrate an understanding of the procedures for processing unserviceable parts

SPECIFIC OUTCOME 5

Restore work area and complete documentation.

OUTCOME RANGE

Restore work area includes tools, equipment and cleaning agents stored and work area cleaned Documentation includes completing job cards, check lists and reports

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Results achieved Component is prepared and cleaned Component is dismantled Component parts are prepared for inspection and evaluation Work area restored, tools and equipment are stored Documentation completed and processed Indicators Task instructions and workshop manuals are obtained and interpreted The appropriate dismantling procedures are determined The appropriate tools and equipment are identified and obtained The component is cleaned, prepared and dismantled in accordance with the workshop manual procedures and flat rate schedule Components parts are cleaned and laid out in order of dismantling for inspection and evaluation Identified unserviceable and serviceable parts are processed in accordance with workshop and quality procedures Replacement parts are ordered in accordance with workplace procedures Documentation is completed and processed Adhered to SHE procedures throughout dismantling task Understanding confirmed Respond to `what if` and `why` questions covering: Reasons for laying out parts in sequence of dismantling Demonstrate an understanding of the procedures for processing unserviceable parts

SPECIFIC OUTCOME 6

Discuss and explain procedures followed for dismantling components.

OUTCOME RANGE

Include workshop manual procedures and reasons for following dismantling procedures.

ASSESSMENT CRITERIA

ASSESSMENT CRITERION 1

Results achieved Component is prepared and cleaned Component is dismantled Component parts are prepared for inspection and evaluation Work area restored, tools and equipment are stored Documentation completed and processed Indicators Task instructions and workshop manuals are obtained and interpreted The appropriate dismantling procedures are determined The appropriate tools and equipment are identified and obtained The component is cleaned, prepared and dismantled in accordance with the workshop manual procedures and flat rate schedule Components parts are cleaned and laid out in order of dismantling for inspection and evaluation Identified unserviceable and serviceable parts are processed in accordance with workshop and quality procedures Replacement parts are ordered in accordance with workplace procedures Documentation is completed and processed Adhered to SHE procedures throughout dismantling task Understanding confirmed Respond to `what if` and `why` questions covering: Reasons for laying out parts in sequence of dismantling Demonstrate an understanding of the procedures for processing unserviceable parts

UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS

My assessment will be governed by the policies and guidelines of the MERSETA Education and Training Quality Assurance who has jurisdiction over this field of learning. My assessor will be accredited and have a technical qualification in this learning area. I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment. I will be assessed in the workplace but I can submit documents, projects, test results and assignments that were not produced in the workplace. I can be assessed against this unit standard to obtain credits or as part of an integrated assessment for a qualification.

UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE

1. Names and functions of: Vehicle components 2. Attributes, descriptions, characteristics and properties: Unserviceable parts 3. Sensory cues: Visual, feel, smell, audible senses 4. Purpose of: Dismantling parts in sequence Inspection and evaluation of parts 5. Regulations, legislation, agreements, policies, standards: Workshop manual procedures SHE procedures Company policies and procedures Quality procedures 6. Relationships, systems: Relationship and function of the various parts in a component

UNIT STANDARD DEVELOPMENTAL OUTCOME

N/A

UNIT STANDARD LINKAGES

N/A

Critical Cross-field Outcomes (CCFO):

UNIT STANDARD CCFO IDENTIFYING

Identify and solve problems: Related to dismantling components

UNIT STANDARD CCFO WORKING

Work effectively with others: Interact with team members and colleagues to obtain parts, tools, equipment and task information

UNIT STANDARD CCFO ORGANISING

Organise and manage myself and my activities: Working according to service and flat rate schedules Manage resources and my time

UNIT STANDARD CCFO COMMUNICATING

Communicate effectively: Interact with team members and colleagues for parts to be inspected and evaluated

UNIT STANDARD CCFO SCIENCE

Use science and technology effectively and critically: Unserviceable parts ordered in accordance with workplace procedures Waste material or parts disposed of in accordance with workplace and SHE procedures

UNIT STANDARD CCFO DEMONSTRATING

Demonstrate an understanding of the world as a set of related systems: Demonstrate the relationship of the various parts within the component

UNIT STANDARD ASSESSOR CRITERIA

N/A

UNIT STANDARD NOTES

N/A

QUALIFICATIONS UTILISING THIS UNIT STANDARD:

	ID	QUALIFICATION TITLE	PRE-2009 NQF LEVEL	NQF LEVEL	STATUS	END DATE	PRIMARY OR DELEGATED QA FUNCTIONARY
Elective	24455	National Certificate: Servicing Vehicles	Level 2	NQF Level 02	Passed the End Date - Status was "Registered"	2005-11-30	Was MERSETA until Last Date for Achievement

PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD:

This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.

NONE

---

All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.