SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Execute sampling of bituminous binder material for testing 
SAQA US ID UNIT STANDARD TITLE
14545  Execute sampling of bituminous binder material for testing 
ORIGINATOR
SGB Civil Engineering Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Physical Planning, Design and Management 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04  5 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners who are assessed as competent against this unit standard will be able to demonstrate competence to sample bituminous materials for standard laboratory testing.

This unit standard will enable learners to identify hazards and protective measures during bituminous material sampling, identify and prepare resource for sampling, execute sampling, label and transport samples to the laboratory.

The unit standard contributes to the overall competence required of the construction materials tester.

The laboratory test results are used for quality control purposes during the construction and manufacturing processes as well as for final acceptance of the finished products.

Its contribution to socio-economic transformation is that learners would be able to undergo RPL-assessment and thereby receive recognition for previous learning and experience. The employability and career prospects of learners can therefore be enhanced by this qualification
Previously disadvantaged individuals with this qualification can also start their own businesses supplying a construction materials testing service - a process that will accelerate economic transformation and give economic empowerment. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
NQF Level 4 in Literacy and Numeracy competencies 

UNIT STANDARD RANGE 
Sampling for the following Standard methods of testing road construction materials - TMH 1 (Technical Methods for Highways):

(i) Method E1 - The determination of the penetration value of bituminous binders.
(ii) Method E2 - The determination of the relative density of bituminous binders.
(iii) Method E3 - The determination of the percentage of bitumen soluble in trichloroethylene.
(iv) Method E4 - The determination of the ductility of bitumen.
(v) Method E5 - The determination of the softening point of bituminous binders by the ring and ball method.
(vi) Method E6 - The performance of bitumen when subjected to the thin film oven test.
(vii) Method E7 - The determination of the xylene- N - heptane equivalent of bitumen (spot test)
(viii) Method E8 - The determination of the viscosity of bitumen and cationic bitumen emulsions by means of the Saybolt Furol viscometer.
(ix) Method E9. - The determination of the viscosity of road tars by means of the standard tar viscometer.
(x) Method E10 - The distillation of road tars.
(xi) Method E11 - The determination of the phenol content of tars.
(xii) Method E12 - The determination of the naphthalene content of tars.
(xiii) Method E13 - The determination of the matter insoluble in toluene in road tars.
(xiv) Method E14 - The determination of the water content of road tars.
(xv) Method E15 - The determination of the anthracene paste content of road tars.
(xvi) Method E16 - The determination of the viscosity of anionic bitumen emulsions using the Engler viscometer.
(xvii) Method E17 - The determination of the water content of emulsions.
(xviii) Method E18 - The determination of the residue on sieving of bitumen emulsions.
(xix) Method E20 - The determination of the coagulation value of bituminous emulsions when performed at a low temperature (stability), when mixed with coarse-graded stone chippings (anionic only) and when mixed with cement (anionic only).
(xx) Method E21 - Binder deposit on cathode in particle charge test of cationic bituminous emulsions.
(xxi) Method E22 - The distillation of cutback bitumen.
(xxii) Method E23 - The determination of the viscosity of cutback bitumen.
(xxiii) Method E24 - The determination of the flashpoint of cutback bitumen by means of the Abel apparatus.
(xxiv) Method E25 - The determination of the penetration on residue from distillation of cutback bitumen.
(xxv) Method E26- The determination of the water content of cutback bitumen. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Determine the number, size and type of samples. 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
1. The number, size and type of tests to be performed are received. 

ASSESSMENT CRITERION 2 
2. The number, size and type of samples for each test to be performed, are identified in accordance to standard methods. 

SPECIFIC OUTCOME 2 
Prepare for sampling. 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
1. The resources required for sampling are identified and procured in accordance to standard methods. 
ASSESSMENT CRITERION RANGE 
Tools and apparatus, storage, transport, personnel.
 

ASSESSMENT CRITERION 2 
2. Resources are prepared for the sampling process in accordance to standard methods. 

SPECIFIC OUTCOME 3 
Execute sampling. 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
1. The materials to be tested are identified. 

ASSESSMENT CRITERION 2 
2. Occupational Health and safety hazards are identified and appropriate steps taken to deal with this in accordance with legislation. 

ASSESSMENT CRITERION 3 
3. Sampling is executed in terms of Industry norms/standard testing methods/project specifications. 

SPECIFIC OUTCOME 4 
Label containers and transport samples to laboratory. 

ASSESSMENT CRITERIA 

ASSESSMENT CRITERION 1 
1. Containers are labelled according to organizational requirements. 

ASSESSMENT CRITERION 2 
2. Sampled materials are transported to laboratory. 

ASSESSMENT CRITERION 3 
3. Labelled containers are handed over to laboratory staff and receipt acknowledged. 


UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the CETA - ETQA for "The National Certificates in Construction Materials Testing".
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the CETA - ETQA.
  • CETA - ETQA, or other ETQA`s who have a Memorandum of Understanding in place with CETA-ETQA, would be responsible for moderation of learner achievements of learners who meet the requirements of this qualification. 
    		•

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    Understand and explain:
    (i) The number, size and type of samples for each test to be performed.
    (ii) The Identification of bituminous materials to be sampled for testing.
    (iii) The preparation for sampling of bituminous materials to be tested.
    (iv) Sampling procedures of bituminous materials to be tested.
    (v) Labelling and transporting of sampled bituminous materials. 

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems - refer to the following Specific Outcome and Assessment criteria:

    Identify material to be sampled
  • The materials to be tested are identified. 
    		•

    UNIT STANDARD CCFO WORKING 
    Work effectively with others - refer to the following Specific Outcome and Assessment criteria:

    Label containers and transport samples to laboratory
  • Labelled containers are handed over to laboratory staff and receipt acknowledged. 
    		•

    UNIT STANDARD CCFO ORGANISING 
    Employ self management - refer to the following Specific Outcome and Assessment criteria:

    Prepare for sampling
  • The resources required for sampling are identified and procured. 
    		•

    UNIT STANDARD CCFO COLLECTING 
    Manage information - refer to the following Specific Outcome and Assessment criteria:

    Label containers and transport samples to laboratory
  • Containers are labelled according to organizational requirements. 
    		•

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively - refer to the following Specific Outcome and Assessment criteria:

    Label containers and transport samples to laboratory
  • Labelled containers are handed over to laboratory staff and receipt acknowledged. 
    		•

    UNIT STANDARD CCFO SCIENCE 
    Demonstrate scientific and technological competence - refer to the following Specific Outcome and Assessment criteria:

    Execute sampling
  • Sampling is executed in terms of Industry norms/standard testing methods/project specifications. 
    		•

    UNIT STANDARD CCFO DEMONSTRATING 
    Understand Contextual world-systems - refer to the following Specific Outcome and Assessment criteria:

    Execute sampling
  • Occupational Health and safety hazards are identified and appropriate steps taken to deal with this. 
    		•

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  23975   National Certificate: Construction Material Testing: Bituminous Materials  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered"     		 2004-02-11  Was CETA until Last Date for Achievement 
    Elective  48817   Further Education and Training Certification: Construction Materials Testing  Level 4  NQF Level 04  Passed the End Date -
    Status was "Reregistered"     		 2023-06-30  CETA 
    Elective  23974   National Certificate: Construction Material Testing: Soils and Aggregates  Level 4  NQF Level 04  Passed the End Date -
    Status was "Registered"     		 2004-02-11  Was CETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.