SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Supervise the process of small bore drilling 
SAQA US ID UNIT STANDARD TITLE
119536  Supervise the process of small bore drilling 
ORIGINATOR
SGB Civil Engineering Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Civil Engineering Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 3  NQF Level 03  15 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard is directed towards people who work in the geotechnical field and who are required to have a wide knowledge of the processes used for drilling small diameter holes with one or more types of equipment.

People credited with this unit standard are able to:
  • Demonstrate knowledge of small bore drilling.
  • Prepare to conduct a drilling application.
  • Supervise the drilling process.
  • Complete the drilling process.
  • Explain health and safety measures required on construction sites. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in:
  • Communication and Mathematical Literacy at NQF Level 2. 

  • UNIT STANDARD RANGE 
    Learners will be assessed against the type of drilling application relevant to their workplace and may include core drilling, rotary drilling, exploration drilling, water well drilling and directional drilling.

    Specific range statements are provided in the body of the unit standard where they apply to particular specific outcomes or assessment criteria. These are intended as a general guide to scope and complexity of what is required. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of small bore drilling. 
    OUTCOME RANGE 
    Drilling types include rotary core drilling, exploration drilling, water well drilling, directional drilling. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The main types of small bore drilling are identified in terms of where they would be used and their benefits. 

    ASSESSMENT CRITERION 2 
    Various types of drilling systems within one of the selected main categories are identified in terms of their specific use requirements. 

    ASSESSMENT CRITERION 3 
    The applications of each drilling system are identified in terms of their benefits and potential pitfalls. 

    ASSESSMENT CRITERION 4 
    Alternative drilling methods are identified in terms of functions and costs. 

    SPECIFIC OUTCOME 2 
    Prepare to conduct a drilling application. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The drilling application equipment required is identified and confirmed to be fit for purpose in terms of the contract requirements. 

    ASSESSMENT CRITERION 2 
    Communication is maintained in such a way that promotes good working relationships and ensures uninterrupted workflow. 

    ASSESSMENT CRITERION 3 
    Potential drilling problems are identified in terms of adverse ground conditions. 

    ASSESSMENT CRITERION 4 
    The equipment is ensured to be available on site when required in accordance with work schedules. 

    ASSESSMENT CRITERION 5 
    The equipment is assembled in accordance with company procedures. 

    ASSESSMENT CRITERION 6 
    Ancillary components required for drilling are confirmed to be in place or available in accordance with work schedules. 
    ASSESSMENT CRITERION RANGE 
    Ancillary components may include pumps, compressors, drilling fluids, grout, casings.
     

    SPECIFIC OUTCOME 3 
    Supervise the drilling process. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The drilling requirements are identified in accordance with company specific work instructions. 

    ASSESSMENT CRITERION 2 
    Instructions are given clearly and direct people to specific work functions in their field of expertise. 

    ASSESSMENT CRITERION 3 
    Relevant information is recorded in accordance with company requirements. 

    ASSESSMENT CRITERION 4 
    Drilling problems encountered are identified and reported in accordance with company reporting procedures. 

    ASSESSMENT CRITERION 5 
    The final drilled hole is verified to be correct in terms of contract requirements. 

    ASSESSMENT CRITERION 6 
    Variations to drilling applications are recorded in terms of company requirements. 

    ASSESSMENT CRITERION 7 
    The drilled hole is confirmed to be acceptable in terms of the performance criteria of the work instruction. 

    SPECIFIC OUTCOME 4 
    Complete drilling applications. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Equipment is cleaned, serviced and made ready for the next application in accordance with company requirements. 

    ASSESSMENT CRITERION 2 
    Equipment is disassembled and stored in accordance with company procedures. 

    ASSESSMENT CRITERION 3 
    Drilling record reports are completed in accordance with company specific requirements. 

    ASSESSMENT CRITERION 4 
    Drilling records are stored and distributed in accordance with company and contract requirements. 

    SPECIFIC OUTCOME 5 
    Explain health and safety measures required on construction sites. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Personal protective equipment required for specific functions is identified and made available in accordance with legal requirements. 

    ASSESSMENT CRITERION 2 
    Personal protective equipment is ensured to be in proper working order in accordance with health and safety legislation. 

    ASSESSMENT CRITERION 3 
    Small tools and equipment are ensured to be in correct working order and used in accordance with manufacturer specifications. 

    ASSESSMENT CRITERION 4 
    Services and potential health and safety problems on site or below ground are pointed out and safety precautions are identified in terms of working close to these services or subsoil conditions. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • Recording requirements on site.
  • Leading a team to achieve work functions.
  • The storage of recorded information according to organisational requirements.
  • Safe use of equipment.
  • Recording and reporting procedures.
  • The types of drilling applications.
  • The uses of drilling applications.
  • Methods of drilling holes.
  • Statutory health and safety requirements. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking. 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively. 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation. 

    UNIT STANDARD ASSESSOR CRITERIA 
    When conducting assessments, assessors must ensure that they are familiar with the full text of the Unit Standards being assessed.

    They must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge.

    As each situation is different, it will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which practitioners are working. These activities and tools may include self-assessment, peer assessment, formative and summative assessment.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If learners are able to explain the essential embedded knowledge but are unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if learners are able to perform the specific outcomes but are unable to explain or justify their performance in terms of the essential embedded knowledge, they should not be assessed as competent.

    Assessors should keep the following principles in mind when designing and conducting assessments against this unit standard:
  • Focus the assessment activities on gathering evidence in terms of the main outcome expressed in the title to ensure assessment is integrated rather than fragmented. Remember we want to declare the person competent in terms of the title. Where assessment at title level is unmanageable, then focus assessment around each specific outcome, or groups of specific outcomes.
  • Make sure evidence is gathered across the entire range, wherever it applies. Assessment activities should be as close to the real performance as possible, and where simulations or role-plays are used, there should be supporting evidence to show the candidate is able to perform in the real situation.
  • Do not focus the assessment activities on each assessment criterion. Rather make sure the assessment activities focus on outcomes and are sufficient to enable evidence to be gathered around all the assessment criteria.
  • The assessment criteria provide the specifications against which assessment judgements should be made. In most cases, knowledge can be inferred from the quality of the performances, but in other cases, knowledge and understanding will have to be tested through questioning techniques. Where this is required, there will be assessment criteria to specify the standard required.
  • The task of the assessor is to gather sufficient evidence, of the prescribed type and quality, as specified in this unit standard, that the candidate can achieve the outcomes again and again and again. This means assessors will have to judge how many repeat performances are required before they believe the performance is reproducible.
  • All assessments should be conducted in line with the following well documented principles of assessment: appropriateness, fairness, manageability, integration into work or learning, validity, direct, authentic, sufficient, systematic, open and consistent. 

  • REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Terminology:

    The terminology used in this unit standard is consistent with generally accepted practice in the construction industry. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  49602   National Certificate: Construction: Geotechnical  Level 3  NQF Level 03  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.