SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Plan, schedule and monitor plastics production 
SAQA US ID UNIT STANDARD TITLE
119170  Plan, schedule and monitor plastics production 
ORIGINATOR
SGB Plastics Manufacturing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 5  Level TBA: Pre-2009 was L5 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
In order for me to perform effectively in the field of plastics manufacturing, I will be able to:
  • Plan and prepare production.
  • Schedule and monitor the flow of production in a manufacturing environment.

    I will also know and understand:
  • The various factors and variables to take into account when planning a production schedule.
  • The basic principles of production planning and scheduling.

    I can be assessed against this unit standard in the context of any volume plastics manufacturing process, e.g.
  • Injection moulding.
  • Blow moulding.
  • Various kinds of extrusion.
  • Variations of thermoforming.
  • Rotational moulding.
  • Calendaring.
  • Compression and related moulding processes.
  • Reaction injection moulding.
  • Polymer composites fabrication processes such as pultrusion, filament winding and resin injection.

    The volume production process also includes the regeneration of recycled materials and the manufacture of intermediate products such as sheet, profiles, compounds and master batches.

    The skill, knowledge and values reflected in this unit standard form part of the exit level outcomes required for the National Certificate in Plastics Manufacturing NQF Level 5. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The credits for this unit standard assume that I have a National Certificate in Plastics Manufacturing NQF Level 4 or an equivalent qualification. They also assume that I am working towards my qualification as part of a learning programme which integrates all the required unit standards.

    My learning time will increase if I do not have:
  • A relevant NQF 4 qualification.
  • Experience in a relevant field.

    My learning time will be decreased if I have experience in this field because:
  • My learning programme will be adjusted to build on what I already know.
  • I can apply to have that prior learning recognised. 

  • UNIT STANDARD RANGE 
    The scope and level of this unit standard is indicated by range statements related to the specific outcomes.

    The skills and knowledge in this unit standard relate to micro and small companies or a production unit within a medium or large company.

    The work reflected in this unit standard is normally performed autonomously. The work will be guided by relevant worksite procedures, manufacturers' specifications and safety, health and environmental legislation. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Collect, sort and prioritise customer and internal orders. 
    OUTCOME RANGE 
    Sort includes matching orders and equipment capability. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 2 
    Calculate production times for each order; determine optimum sequence of production and schedule each order. 
    OUTCOME RANGE 
    Optimum sequence includes establishing constraints, material availability, capacity and special cases. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 3 
    Develop production orders and schedules for each line and communicate with relevant personnel. 
    OUTCOME RANGE 
    Line also refers to individual machines. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 4 
    Monitor production progress, adapt the production schedule or make changes in response to events. 
    OUTCOME RANGE 
    Events include downtime or equipment failure, absenteeism, strikes, slow completion of orders and unforeseen circumstances. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 5 
    Calculate overall plant efficiency and productivity; report production progress and delays. 
    OUTCOME RANGE 
    Reporting includes formal and informal reporting sessions and informing sales staff and customers.

    Reports include volume achievement according to production mix, on time delivery, throughput times and constraint adherence. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    See the consolidated assessment criteria for this unit standard which are listed under the last outcome. 
    ASSESSMENT CRITERION NOTES 
    The assessment criteria for this unit standard have been consolidated to:
  • Facilitate integrated assessment.
  • Ensure that the purpose of the unit standard as a whole is assessed (not just the component parts).

    Use the consolidated assessment criteria that are reflected under the last outcome to develop the assessment guides and assessment tools for this unit standard. 

  • SPECIFIC OUTCOME 6 
    Engage in discussions on planning and monitoring production with the workgroup and other partners. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Workable production schedule is developed. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Results achieved. 

    ASSESSMENT CRITERION 2 
    Production targets are achieved. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Results achieved. 

    ASSESSMENT CRITERION 3 
    Happy customer who pays on time. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Results achieved. 

    ASSESSMENT CRITERION 4 
    Capacity and utilisation of resources is optimised. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 
    ASSESSMENT CRITERION RANGE 
    My assessor base his or her judgement on.
     

    ASSESSMENT CRITERION 5 
    No delays are caused through poor planning or poor communication. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 6 
    Production planning procedures are applied. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 7 
    Documents and reports are legible and accurate. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 8 
    Reports are timeously circulated and discussed with affected parties. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Indicator. 

    ASSESSMENT CRITERION 9 
    Discussions demonstrate that I have an understanding of the key concepts and principles related to planning and monitoring production and an understanding of how these relate to application in practice. 
    ASSESSMENT CRITERION NOTES 
    Assessment criterion type: Understanding confirmed. 
    ASSESSMENT CRITERION RANGE 
    Discussions include issues relating to:
  • The importance of an achievable production plan.
  • The process for developing a production schedule.
  • The importance of monitoring and controlling production.
  • Application of various principles related to production planning and scheduling.
     


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    To obtain credits I must be assessed. The assessment will be based on evidence that I produce. My assessment will be governed by the policies and guidelines of a relevant Education and Training Quality Assurance body (ETQA), which has jurisdiction over this field of learning. The policies and procedures of the relevant ETQA will also determine:
  • How my assessment is moderated.
  • How I can appeal against the outcome of the assessment.

    Any institution or company which offers learning that will enable me to achieve the purpose of this unit standard must be accredited as a provider through the relevant ETQA.

    My assessment against this standard should meet all the requirements of established principles. It should include practical assessment activities, which are appropriate to the contents of this unit standard. These activities should include an appropriate combination of self and peer assessment, practical and oral assessments, observations, etc.

    I can be assessed in the language of my choice although if I have to report incidents or conditions to someone else, I will be assessed on my ability to report in the language commonly used in my working environment.

    I will be assessed on all the specific outcomes, critical cross-field outcomes and essential embedded knowledge. The specific outcomes must be assessed in their own right, through oral and practical evidence. My assessment will not only be based on observation but also on other evidence which I compile into a portfolio of evidence. I cannot be assessed only through a written or oral test.

    The specific outcomes and essential knowledge will be assessed in relation to each other. If I am able to explain the items which fall under the heading of essential embedded knowledge, but am unable to perform the specific outcomes, then I cannot be assessed as 'competent'. Similarly, if I am able to perform tasks described under the specific outcomes, but cannot explain or justify them in terms of the fundamental concepts, principles and practice relevant to the level of the unit standard that underpins my skill, then I cannot be assessed as 'competent'.

    I will also be assessed on my ability to apply the principles and techniques related to the critical cross-field outcomes, not only in terms of what I can demonstrate, but also in terms of what I know and can discuss.

    My assessment for this unit standard can be done in conjunction with the assessment of other unit standards related to a qualification, and even in conjunction with my assessment for the qualification as a whole. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following items reflect the type of knowledge that the assessor will evaluate:

    1. Names and functions of:
  • Production planning terminology.
  • Production planning tools.

    2. Purpose of:
  • Scheduling production.
  • Monitoring adherence to schedule.
  • Monitoring and measuring performance.
  • Managing production.

    3. Attributes, descriptions, characteristics and properties:
  • Various approaches to production planning and scheduling, e.g. push, pull, Just-in-time.
  • Components of production planning, e.g. capacity, materials, inventory, demand.
  • Seasonal demand

    4. Processes and events:
  • Planning.
  • Scheduling, monitoring, measurement and control.
  • Downtime or equipment failure.
  • Slow completion of orders and unforeseen circumstances.

    5. Causes and effects, implications of:
  • Inadequate information.
  • Poor production scheduling.
  • Incorrect or inadequate planning.
  • Absenteeism and strikes.

    6. Procedures and techniques:
  • Production planning, sequencing, scheduling and measurement techniques.
  • Calculating machine utilisation and efficiencies.
  • Calculating machine hourly rates or standard times.
  • Board, paper and software systems.

    7. Regulations, legislation, agreements, policies, standards:
  • Applicable company policies and procedures.
  • Impact of safety, health and environmental issues on production planning and scheduling.

    8. Theory: rules, principles, laws:
  • Applicable statistical and graphical concepts and tools.
  • Applicable calculation formulae.
  • Planning and scheduling principles.

    9. Relationships, systems:
  • Relationships between an effective production plan, sales, plant output, inventory, delivery dates and satisfied customers. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify factors influencing production achievement and optimise schedules accordingly. 

    UNIT STANDARD CCFO WORKING 
    Interact with others in the process of planning and monitoring production. 

    UNIT STANDARD CCFO ORGANISING 
    Follow consistent work patterns to prioritise orders, determine optimum sequence of production and schedule orders. 

    UNIT STANDARD CCFO COLLECTING 
  • Analyse and evaluate production factors.
  • Sort and match orders with machine capability and prioritise. 

  • UNIT STANDARD CCFO COMMUNICATING 
  • Communicate production schedule and corrective steps to affected parties.
  • Collect, incorporate and redistribute appropriate facts and figures.
  • Provide critical feedback to relevant process partners or customers. 

  • UNIT STANDARD CCFO SCIENCE 
    Use appropriate planning techniques to schedule and monitor production. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Understand the relationship of a production plan to plant output. 

    UNIT STANDARD ASSESSOR CRITERIA 
    My assessor will be registered and have a plastics manufacturing qualification at NQF 6 or higher. In the absence of assessors with such qualifications, the ETQA can make interim arrangements. My assessor should also be active in the industry and be familiar with the materials, machinery, products and level of technology in which I have contextualised my skills and knowledge. 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  36153   National Certificate: Polymer Composite Fabrication  Level 4  Level TBA: Pre-2009 was L4  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  58025   National Certificate: CNC Production Machining  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  49448   National Certificate: Plastics Manufacturing  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MERSETA 
    Elective  57122   National Certificate: Printing and Manufacture of Packaging  Level 5  Level TBA: Pre-2009 was L5  Passed the End Date -
    Status was "Reregistered" 
    2015-06-30  FPMSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.