SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Establish a plan for the monitoring, safe use and maintenance of equipment implements, technology and infrastructure 
SAQA US ID UNIT STANDARD TITLE
116290  Establish a plan for the monitoring, safe use and maintenance of equipment implements, technology and infrastructure 
ORIGINATOR
SGB Primary Agriculture 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Primary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 4  NQF Level 04 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
A learner achieving this unit standard will be able to design, prepare and implement basic operational procedures for the cleaning, storage and proper maintenance of equipment, implements and infrastructure. The learner will also be able to monitor the safe use of equipment, technology, infrastructure and implements.

In addition learners will be well positioned to extend their learning and practice into other areas of agriculture, or to strive towards professional standards and practices at higher levels.

Competent learners will be fully conversant with agricultural regulations and aspects of safety as to provide the environment for the application of quality practices and thus strengthen agricultural practices in general. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
It is assumed that a learner attempting this unit standard will show competence against the following unit standards or equivalent:
  • NQF 3: Apply routine maintenance and servicing plans and procedures.
  • NQF 2: Define and understand production systems and production management. 

  • UNIT STANDARD RANGE 
    Range statements are neither comprehensive nor necessarily appropriate to all contexts. Alternatives must however be comparable in scope and complexity. These are only as a general guide to scope and complexity of what is required. 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Develop a basic task related work program related to the scheduling and allocation of equipment and implements. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The information required to develop a task-related work plan is identified and collected. 

    ASSESSMENT CRITERION 2 
    Equipment and implements are identified and allocated efficiently. 

    ASSESSMENT CRITERION 3 
    The skill needs of the work team are identified. 

    ASSESSMENT CRITERION 4 
    A task-related work plan is developed. 

    SPECIFIC OUTCOME 2 
    Prepare and implement basic operational procedures for the cleaning, storage and proper maintenance of equipment, implements and infrastructure. 
    OUTCOME RANGE 
    Maintenance of equipment, implements and infrastructure includes, but is not limited to the draining and replacing oil in a tractor, adjusting fan belts, checking tyre pressure of trucks, adjusting a plough angle, and adjusting the hydraulic lift on tractor. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Maintenance procedures are modified, prepared and implemented. 

    ASSESSMENT CRITERION 2 
    Major servicing of equipment is performed. 

    ASSESSMENT CRITERION 3 
    Equipment not functioning efficiently is adapted. 
    ASSESSMENT CRITERION RANGE 
    Equipment refers to any of those that are used in the agricultural sector to perform functions that include, but are not limited to, fertiliser distribution, shearing, water distribution, sprayers, vehicles, and tractors.

    Fertilizer distribution faulty, mechanized shearing tool jagging, water distribution wrong, cutting / digging tools blunt, pressure drop because of blocked pipe, blocked nozzles in spraying boom, etc.
     

    ASSESSMENT CRITERION 4 
    Re-calibration of appropriate equipment is performed or requested. 
    ASSESSMENT CRITERION RANGE 
    Fertilizer spreader, oil and re-adjust shearing tool, adjust water pressure / irrigation pipe distances, sharpen tools, unblock pipes, clean nozzles, etc.
     

    ASSESSMENT CRITERION 5 
    Safety elements of equipment / tool / technology is adjusted i.e. safety shields. 

    SPECIFIC OUTCOME 3 
    Recognise, identify and solve problems related to the use of implements and equipment in an agricultural environment. 
    OUTCOME RANGE 
    Problem indicators may refer to any unusual occurrence, to possible cause of a problem and steps to resolving the problem. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The possible causes of the problem encountered during task execution are identified. 

    ASSESSMENT CRITERION 2 
    Steps to be taken to rectify problems encountered are planned and organised. 

    ASSESSMENT CRITERION 3 
    The consequences of not resolving an encountered problem are explained. 
    ASSESSMENT CRITERION RANGE 
    Consequences could be anything from 'Animal could die', to 'Task not completed on time', 'Staff / workers endangered', or 'Environmental damage could occur.
     

    ASSESSMENT CRITERION 4 
    Alternative methods and contingency plans are identified and implemented. 

    ASSESSMENT CRITERION 5 
    Problems that cannot be resolved are identified and reported timeously. 

    SPECIFIC OUTCOME 4 
    Draw up plans to ensure that safety regulations are implemented as prescribed for the use of implements, agro-chemicals and equipment. 
    OUTCOME RANGE 
    The plan should be based on the accident prevention policy of the organisation, and basic safety precautions as outlined in the National Occupation Safety Act, to prevent fires, accidents, chemical spills and injury. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The implementation of the NOSA Act is explained. 

    ASSESSMENT CRITERION 2 
    The necessary safety procedures in the handling of fuel, agro-chemicals, equipment and implements are identified and implemented. 

    ASSESSMENT CRITERION 3 
    The procedures for the safe use and operation of implements and equipment are communicated to others. 

    SPECIFIC OUTCOME 5 
    Adapt equipment, implements and technology to suit different agricultural situations and processes. 
    OUTCOME RANGE 
    The function and use of equipment, implements and technology can be applied differently in different circumstances, depending on the context. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The required task or function is identified and explained. 

    ASSESSMENT CRITERION 2 
    The correct equipment, implement or technological application that could fulfil the function is identified. 

    ASSESSMENT CRITERION 3 
    The equipment and/or implements are adjusted or adapted to fulfil the required function. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    The assessment of qualifying learners against this standard should meet the requirements of established assessment principles.

    It will be necessary to develop assessment activities and tools, which are appropriate to the contexts in which the qualifying learners are working. These activities and tools may include an appropriate combination of self-assessment and peer assessment, formative and summative assessment, portfolios and observations etc.

    The assessment should ensure that all the specific outcomes, critical cross-field outcomes and essential embedded knowledge are assessed.

    The specific outcomes must be assessed through observation of performance. Supporting evidence should be used to prove competence of specific outcomes only when they are not clearly seen in the actual performance.

    Essential embedded knowledge must be assessed in its own right, through oral or written evidence and cannot be assessed only by being observed.

    The specific outcomes and essential embedded knowledge must be assessed in relation to each other. If a qualifying learner is able to explain the essential embedded knowledge but is unable to perform the specific outcomes, they should not be assessed as competent. Similarly, if a qualifying learner is able to perform the specific outcomes but is unable to explain or justify their performance in terms of the essential embedded knowledge, then they should not be assessed as competent.

    Evidence of the specified critical cross-field outcomes should be found both in performance and in the essential embedded knowledge.

    Performance of specific outcomes must actively affirm target groups of qualifying learners, not unfairly discriminate against them. Qualifying learners should be able to justify their performance in terms of these values.
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard or assessing this unit standard must be accredited as a provider with the relevant ETQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The person is able to demonstrate a basic knowledge of:
  • Basic scheduling and work flow.
  • Operational procedures.
  • The safe handling of tools and equipment.
  • The NOHSA Act and how it applies in the agricultural sector.
  • The principles of safety precautions.
  • Determining damaged and faulty equipment.
  • The use and adaptation of tools, equipment and machinery in different combinations.
  • Teamwork and communication.
  • Work program development.
  • Identification and resolving problems related to a work program.
  • The benefits of a well prepared work plan.
  • Personnel management. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Problem solving relates to all specific outcomes. 

    UNIT STANDARD CCFO WORKING 
    Teamwork relates to all specific outcomes. 

    UNIT STANDARD CCFO ORGANISING 
    Self-organisation and management relates to specific outcomes:
  • Develop a task related work program related to the scheduling and allocation of equipment and implements.
  • Recognise, identify and solve problems related to the use of implements and equipment in an agricultural environment.
  • Draw up plans to ensure that safety regulations are implemented as prescribed for the use of implements, agro-chemicals and equipment.
  • Adapt equipment, implements and technology to suit different agricultural situations and processes. 

  • UNIT STANDARD CCFO COLLECTING 
    Information evaluation relates to specific outcomes:
  • Develop a task related work program related to the scheduling and allocation of equipment and implements.
  • Prepare and implement basic operational procedures for the cleaning, storage and proper maintenance of equipment, implements and infrastructure.
  • Draw up plans to ensure that safety regulations are implemented as prescribed for the use of implements, agro-chemicals and equipment.
  • Adapt equipment, implements and technology to suit different agricultural situations and processes. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communication relates to all specific outcomes. 

    UNIT STANDARD CCFO SCIENCE 
    Use science and technology relates to all specific outcomes. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Inter-relatedness of systems relates to specific outcomes:
  • Develop a task related work program related to the scheduling and allocation of equipment and implements.
  • Recognise, identify and solve problems related to the use of implements and equipment in an agricultural environment.
  • Draw up plans to ensure that safety regulations are implemented as prescribed for the use of implements, agro-chemicals and equipment.
  • Adapt equipment, implements and technology to suit different agricultural situations and processes. 

  • UNIT STANDARD CCFO CONTRIBUTING 
    Self-development relates to specific outcomes:
  • Develop a task related work program related to the scheduling and allocation of equipment and implements.
  • Draw up plans to ensure that safety regulations are implemented as prescribed for the use of implements, agro-chemicals and equipment.
  • Adapt equipment, implements and technology to suit different agricultural situations and processes. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  48979   National Certificate: Animal Production  Level 4  Level TBA: Pre-2009 was L4  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  AgriSETA 
    Core  49009   National Certificate: Plant Production  Level 4  Level TBA: Pre-2009 was L4  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. Balemi Consulting Pty Ltd 
    2. Boikgantsho Consulting & Events 
    3. Cedara College of Agriculture 
    4. ELSENBURG AGRICULTURAL COLLEGE 
    5. Heedmorine Training 
    6. KayDee Project Management Cc 
    7. Leruo ke Matla Training and Enterprise Development Services 
    8. Maishamalema Development Training 
    9. Mananthatshema Skills Dev. Centre 
    10. Matotomana Training & General Trading 
    11. Mogaladi Business Enterprise 
    12. Morwa Agri-development cc 
    13. Mthashana FET College - Vryheid Campus 
    14. Mvelo Consultant 
    15. National Institute For The Deaf - NID 
    16. Resource Consulting Services (PTY) Ltd 
    17. Sekhukhune FET College - Central Office 
    18. Selipha Trading (Pty) Ltd 
    19. Setlakala Business Development 
    20. Suidwes Beleggings Eiendoms Beperk 
    21. The Skills Development Hub (Pty) Ltd 
    22. TPN Training and Recruitment cc 
    23. Tripple R Training Provider 
    24. Vari Holdings (Pty)Ltd 
    25. Westco Agri Training 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.