SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD: 

Operate a mobile crane 
SAQA US ID UNIT STANDARD TITLE
116254  Operate a mobile crane 
ORIGINATOR
SGB Civil Engineering Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Civil Engineering Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  20 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Reregistered  2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The qualifying learner is capable of:

Demonstrating an integrated practical and theoretical grounding in crane operations according to safe handling and maintenance practices in compliance with crane manufacturer's and legislated standards.

The contribution to the national skills development strategy is the key developmental interface between learners and new competencies to be achieved.

Learners who master the applied competence described in this unit standard will contribute to the development of a professional community of civil engineering construction crane operators who are able to competently use science and technology when applying operation techniques.

The contribution to socio-economic transformation is that learners will be able to undergo rpl-assessment and thereby receive recognition for previous learning and experience. This in turn will enhance the employability and career prospects of learners employed in this sector. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
The following knowledge, skills attitude and/or equivalent:
Learning assumed to be in place
NQF Level 1 Numeracy and NQF Level 1 Literacy

The driver should be declared physically fit and have completed an eyesight test (such as the Orthorator test, the Purdue University Test No. 3, etc.) and an industry recognised depth perception and hand-eye co-ordination test.

It is assumed that people starting to learn towards this unit standard have already undergone company induction, have an appropriate licence to operate in the work area, and are competent in unit standards which address:
  • Relevant Code of practice
  • Occupational Health, Safety and General Housekeeping
  • Mechanical Awareness and Plant Appreciation 

  • UNIT STANDARD RANGE 
    In the range of a rated capacity of up to 50 Tons

    Limited to work carried out on a standard crane, or with standardised fittings

    Major components include:
  • Chassis
  • Mobile & jib
  • Counter weight, hoist
  • Jib & cab
  • Hoist & slew systems
  • Brakes & Transmission
  • Trolley & hookblock

    Factors influencing safety and suitability of a crane:
  • Stability
  • Suitability
  • State of repair
  • Proximity of other machines and workers

    Statutory requirements include but are not limited to:
  • Relevant Code of practice
  • Safety, Health & Environmental legislation
  • Local Provincial authority requirements

    Appropriate checklist is any one or a combination of the following:
  • Manufacturer's checklist
  • Pre-operational checklist
  • Site-specific checklist
  • Daily checklist
  • Weekly checklist
  • Site-specific checklist

    Inspecting and recording the operational fitness of all components of the crane should cover:
  • Structural Components
  • Mechanical & Electrical Systems
  • Cab, controls & levers
  • Mast Sections
  • Chassis & Ballast
  • Hoist Ropes, Trolley & Hookblock

    Worksite procedures include manufacturer's procedures, operators manuals and site operational requirements, or similar procedures
  • Corrective action includes inspections and/or reporting
  • Controls include levers, switches forwards, reverse, left, right, gear selection, braking
  • All implement and attachment movements
  • Corrective action includes repairing and/or reporting 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of the functions of a mobile crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The main functions of Mobile Crane's are explained in terms of manufacturer's specifications. 

    ASSESSMENT CRITERION 2 
    The operation of all major components is explained in terms of their functions. 

    ASSESSMENT CRITERION 3 
    All safety features and warning devices on the crane are identified, and their purposes explained in accordance with manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    The maximum operating capacities are explained in terms of the designed crane capabilities. 

    ASSESSMENT CRITERION 5 
    Warnings from crane indicators and gauges are explained according to manufacturer's specifications. 

    ASSESSMENT CRITERION 6 
    Corrective actions are described or demonstrated in terms of neutralising warnings received. 

    SPECIFIC OUTCOME 2 
    Identify the safety and suitability of crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Demonstrate the ability to identify the suitability of the crane prior to utilisation. 

    ASSESSMENT CRITERION 2 
    Demonstrate ability to assess operational capability of lifting equipment (e.g. correct SWL of slings etc). 

    ASSESSMENT CRITERION 3 
    Demonstrate an understanding of the influence of load/range characteristics, manufacturers' requirements and environmental conditions. 

    ASSESSMENT CRITERION 4 
    Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Mobile crane in compliance with statutory regulations. 

    SPECIFIC OUTCOME 3 
    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Pre-operational checks are carried out according to appropriate checklist. 

    ASSESSMENT CRITERION 2 
    Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and recordkeeping using a logbook. 

    ASSESSMENT CRITERION 3 
    Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified. 

    SPECIFIC OUTCOME 4 
    Operate mobile crane. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The purpose of the various controls is explained in accordance with their designed use. 

    ASSESSMENT CRITERION 2 
    Functions of the various controls are demonstrated in accordance with the manufacturer's specifications. 

    ASSESSMENT CRITERION 3 
    Controls are used to effectively manoeuvre the crane within manufacturer's specifications. 

    ASSESSMENT CRITERION 4 
    Safe working procedures are followed according to manufacturer's specifications, site specific and statutory requirements. 

    ASSESSMENT CRITERION 5 
    Crane performance is monitored and corrective action is taken when necessary, in accordance with manufacturer's specifications. 

    ASSESSMENT CRITERION 6 
    Crane is operated without risk of damage or loss to machine or property, or injury to people. 

    ASSESSMENT CRITERION 7 
    Hazards specific to operating Mobile Crane's and ways to minimise these are explained in terms of potential damage to machine and property, and injury to people. 

    ASSESSMENT CRITERION 8 
    Start-up and shutdown procedures are followed according to manufacturer's specifications. 

    ASSESSMENT CRITERION 9 
    Crane is set up according to manufacturer's and company requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    N/A 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Mobile crane operating procedures and main functions of all major components and systems
  • The maximum operating capacities of the designed working capabilities.
  • Statutory requirements including the Relevant Code of practice and Safety, Health & Environmental legislation
  • Recognized hand signals (and other methods of communication) to direct the crane movements.
  • Selection of crane against environmental restraints 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems

    Evident in the following specific outcomes and assessment criteria:

    Demonstrate Knowledge of the functions of a Mobile Crane
  • Corrective actions are described or demonstrated in terms of neutralising warnings received. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others

    Evident in the following specific outcomes and assessment criteria:

    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane > Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications. 

    UNIT STANDARD CCFO ORGANISING 
    Employ self management

    Evident in the following specific outcomes and assessment criteria:

    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane > Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and recordkeeping using a logbook. 

    UNIT STANDARD CCFO COLLECTING 
    Manage information

    Evident in the following specific outcomes and assessment criteria:

    Demonstrate Knowledge of the functions of a Mobile Crane
  • Warnings from crane indicators and gauges are explained according to manufacturer's specifications. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively

    Evident in the following specific outcomes and assessment criteria:

    Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane > Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified. 

    UNIT STANDARD CCFO SCIENCE 
    Demonstrate scientific and technological competence

    Evident in the following specific outcomes and assessment criteria:

    Identify the safety and suitability of the crane.
  • Demonstrate ability to assess operational capability of lifting equipment (e.g. correct SWL of slings etc).
  • Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Mobile Crane in compliance with statutory regulations. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Understand contextual world-systems

    Evident in the following specific outcomes and assessment criteria:

    Identify the safety and suitability of the crane.
  • Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Mobile Crane in compliance with statutory regulations.

    Operate a Mobile Crane
  • Hazards specific to operating Mobile Crane's and ways to minimise these are explained in terms of potential damage to machine and property, and injury to people. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  48961   National Certificate: Construction: Crane Operations  Level 2  NQF Level 02  Reregistered  2023-06-30  CETA 
    Elective  59729   National Certificate: Mechanical Handling (Rigging)  Level 2  NQF Level 02  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  48794   National Certificate in Quality Checking of Tyres and Tyre Components  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  71989   National Certificate: Automotive Components: Manufacturing and Assembly  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  58862   National Certificate: Electro-Mechanical Winding  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  58720   National Certificate: Engineering Fabrication  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  64829   National Certificate: Lifting Machine Operations  Level 3  NQF Level 03  Reregistered  2023-06-30  TETA 
    Elective  23255   National Certificate: Mechanical Engineering: Fitting and Machining  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  91926   National Certificate: Mechanical Engineering: Machining and Tooling  Level 3  NQF Level 03  Reregistered  2023-06-30  As per Learning Programmes recorded against this Qual 
    Elective  67609   National Certificate: Mechatronics  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  79666   National Certificate: Metal and Engineering Manufacturing Processes  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  64190   National Certificate: Metals Production  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 
    Elective  49449   National Certificate: Plastics Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  36155   National Certificate: Polymer Composite Fabrication  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  79407   National Certificate: Polymer Compound Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  21012   National Certificate: Power and Telecommunication Cable Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  24217   National Certificate: Thermoplastic Fabrication  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  48798   National Certificate: Tyre and Tyre Component Manufacturing  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  48795   National Certificate: Tyre Assembly  Level 3  NQF Level 03  Reregistered  2023-06-30  MERSETA 
    Elective  57886   National Certificate: Welding Application and Practice  Level 3  NQF Level 03  Reregistered  2021-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. AA Forklift Training Centre 
    2. AA Technical Services PTY LTD 
    3. AAH Skills and Development 
    4. Accre-Com Training CC 
    5. ACT SKILLS DEVELOPMENT 
    6. AETA Training Solutions 
    7. Africa Training Centre 
    8. Agisanang SA Training 
    9. Alika Investment CC 
    10. AME Skills Development Training Centre 
    11. ANGLOGOLD ASHANTI LTD 
    12. Arcelor Mittal Steel Vanderbijlpark 
    13. AREHONE MULTI TRAINING CENTRE 
    14. Artisans in Motion Pty Ltd 
    15. Asiphepheni Training Services 
    16. Aveng Grinaker -LTA Civil Engineering 
    17. Babcock Plant Services Pty Ltd 
    18. Bakubung Driver Training and consultants CC 
    19. Bee-Safe Programme Development and Training (Pty) Ltd 
    20. Bessonic Investments 
    21. Best Hope Academy & Consultancy 
    22. Bev Short Training Consultants 
    23. BJS FORKLIFTS TRAINING 
    24. BreErivier Training Development CC Mossel Bay 
    25. BreErivier Training Development CC Worcester 
    26. Cathy Hill Solutions (Pty) Ltd 
    27. ChamCham Corporation (PTY) Ltd 
    28. CHAMDOR DRIVER TRAINING CC 
    29. Circleway College 
    30. CLEO 
    31. Culmen Wes-Kaap CC 
    32. Dee's Training (PTY) LTD 
    33. Dee-Bravo Training Centre 
    34. Die Mnyandoro''s G.M. Agency (Pty) Ltd 
    35. Diversity technology Training Institute 
    36. DMG Global Training Solutions (Pty) Ltd 
    37. DOD School of Logistics Training 
    38. Dreyer & Dreyer Risk Solutions 
    39. Driven Machinery Training Services cc 
    40. DSQ Co 
    41. Dynalift cc 
    42. Edu Wize Group Pty Ltd 
    43. Educon Training and Development PTY LTD 
    44. Excellect 209 PTY LTD 
    45. Exclusive Training Services 
    46. Exodec 388 CC 
    47. Firsat (Pty) Ltd 
    48. Fost Training Pty (Ltd) 
    49. G T Training Service Provider 
    50. Global Safety Training & Skills Dev Standards 
    51. Harvestine Investments 
    52. Hazchemwize PTY Ltd 
    53. He and She Driver Training Centre 
    54. Ikaheng HR Solutions Pty Ltd 
    55. Ikusasa Lethu Projects and Training (Pty) Ltd 
    56. Immenent HR Solutions CC 
    57. Impact Skills Development (Pty) Ltd 
    58. Intellectual Technical Training Institute 
    59. Isipho Sempilo Trading 42 
    60. Itakane Trading 325 Pty Ltd 
    61. Iyanda Holdings(Pty) Ltd 
    62. Johnson Crane Hire Pty Ltd 
    63. Kahisano Skills Development and Training 
    64. KKH Operator Training and Projects Pty Ltd 
    65. Kriel Training (PTY) LTD 
    66. Kulika Training and Consultancy Pty Ltd 
    67. Learning Exchange Pty Ltd 
    68. LEFA Training and Projects 
    69. Lehway Safty Training and Risk Management 
    70. Licence Wise 
    71. Lifting Operator Training Centre cc 
    72. Little Treehouse Holdings (PTY) Ltd 
    73. LTM Training and Remote Learning Solutions 
    74. M AND C ACADEMY AND CONSULTANCY PTY LTD 
    75. Madibeng Edu Centre and Suppliers Pty Ltd 
    76. Magas Training and Development (Pty) Ltd 
    77. Majuba FET College - Newcastle Technology Centre 
    78. Malamba Forklift Training 
    79. Marholeni M Trading Enterprize 
    80. Masifundeni Training (PTY) LTD 
    81. Matimba Rigging & Training (SECUNDA) (TP) 
    82. MCD TECHNICAL TRAINING CENTRE (Legacy) Mers-3726 
    83. MCMEGZ Training 
    84. Mediro Training Academy 
    85. Merrod Trading 122 Pty Ltd 
    86. Mittal Steel Newcastle 
    87. Mkholo Pardon Training Institution 
    88. MMBG Trading And Consulting 
    89. MMTI Holdings 
    90. Mnce Trading cc 
    91. Mobile Training cc 
    92. Modern Technical College FET 
    93. Mphatlalatsane Learning Resources 
    94. Mtimande & Associates 
    95. Mziphela Training and Projects Pty. Ltd 
    96. Ndwamato Training Solutions PTY LTD 
    97. NORTH WEST COMMUNITY BASED ORGANIZATIONS NETWORK 
    98. NOSA LOGISTICS PTY LTD 
    99. Nowethu Learning Institute cc 
    100. NS Traders 
    101. OHSTEC 
    102. OSR Trading 
    103. Phephani Learnerships cc 
    104. Powergate Training 
    105. Precision skills development and training 
    106. Primeserv Corporate Solutions Pty Ltd 
    107. Pro - Con Skills Centre 
    108. PRO Skills Development Pty Ltd 
    109. Progressive Computer Center 
    110. Protrain Solutions 
    111. Quantum Leap College Pty Ltd 
    112. Renntek Pty Ltd 
    113. RM Chain Hoists 
    114. Safety Skills Development Training 
    115. Salestalk 88 Pty Ltd T/A Concord Skills and Training 
    116. Sediba Sabasadi Skills Training Academy (Pty) Ltd 
    117. Seng''khona Trading Enterprise 129 cc 
    118. Sharp Edge Consulting and Training 
    119. SHEPROSA PTY LTD 
    120. Sisabenza Operator Training (PTY) LTD 
    121. Solly''''s SkillsTraining Centre 
    122. Starcrow 36 Bk 
    123. Strat Training pty ltd 
    124. Striving Mind Academy and Consultancy Pty Ltd 
    125. SVA Training 
    126. Tagane Trading and Training Services Pty Ltd. 
    127. Tamar Academy (Pty) Ltd 
    128. The Assessment Zone (Pty) Ltd 
    129. The Skills Authority 
    130. The Skills Matrix 
    131. Tjeka Training Matters Pty Ltd 
    132. Training at Divine Group Pty Ltd 
    133. Training Consultant and SD College 
    134. TRANSVAAL COLLEGE OF EDUCATION 
    135. Transvaal Legislative Training 
    136. Transvaal Training 
    137. True-Blue Training (Pty) Ltd 
    138. Tshireletso Multi-skills and Training 
    139. Uplift Quality Solutions Pty Ltd 
    140. Uzoyithola Training and Consulting 
    141. Vhonisani Training Academy & Projects 
    142. Wheelman S A 
    143. WHSE Training College (Pty) Ltd 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.