All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |
SOUTH AFRICAN QUALIFICATIONS AUTHORITY |
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: |
Operate a cab controlled overhead crane |
SAQA US ID | UNIT STANDARD TITLE | |||
116231 | Operate a cab controlled overhead crane | |||
ORIGINATOR | ||||
SGB Civil Engineering Construction | ||||
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY | ||||
- | ||||
FIELD | SUBFIELD | |||
Field 12 - Physical Planning and Construction | Civil Engineering Construction | |||
ABET BAND | UNIT STANDARD TYPE | PRE-2009 NQF LEVEL | NQF LEVEL | CREDITS |
Undefined | Regular | Level 2 | NQF Level 02 | 8 |
REGISTRATION STATUS | REGISTRATION START DATE | REGISTRATION END DATE | SAQA DECISION NUMBER | |
Passed the End Date - Status was "Reregistered" |
2018-07-01 | 2023-06-30 | SAQA 06120/18 | |
LAST DATE FOR ENROLMENT | LAST DATE FOR ACHIEVEMENT | |||
2026-06-30 | 2029-06-30 |
In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise. |
This unit standard does not replace any other unit standard and is not replaced by any other unit standard. |
PURPOSE OF THE UNIT STANDARD |
The qualifying learner is capable of:
Demonstrating an integrated practical and theoretical grounding in Crane Operations according to safe handling and maintenance practices in compliance with crane manufacturer's and legislated standards. The contribution to The National Skills Development Strategy is the key developmental interface between learners and new competencies to be achieved. Learners who master the applied competence described in this unit standard will contribute to the development of a professional community of Civil Engineering Construction Crane Operators who are able to competently use science and technology when applying operation techniques The contribution to socio-economic transformation is that learners will be able to undergo RPL-assessment and thereby receive recognition for previous learning and experience. This in turn will enhance the employability and career prospects of learners employed in this sector. |
LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING |
The following knowledge, skills attitude and/or equivalent:
Learning assumed to be in place NQF Level 1 Numeracy and NQF Level 1 Literacy The operator should be declared physically fit and have completed an eyesight test (such as the Orthorator test, the Purdue University Test No. 3, etc.) and an industry recognised depth perception and hand-eye co-ordination test. It is assumed that people starting to learn towards this unit standard have already undergone company induction, have an appropriate licence to operate in the work area, and are competent in unit standards which address: |
UNIT STANDARD RANGE |
Limited to work carried out on a standard crane, or with standardised fittings
Major components may include but is not limited to: brakes, ropes, sheaves, load equalisers, load indictors, limit warning devices, slings, spreaders, hooks, bins, tongs, grabs, magnets. Lifting equipment may include but is not limited to wire slings, chains, magnets, nylon straps, lifting beams, spreader bars Factors influencing safety and suitability of a crane: Hazards may include but is not limited to - access, obstructions, field of vision, communications, travel route, unauthorised people, insecure loads, unstable loads, unknown loads, nature of loads. Statutory requirements include but are not limited to: Local Provincial authority requirements Appropriate checklist is any one or a combination of the following: Inspecting and recording the operational fitness of all components of the crane should cover: within convenient reach of load, sound solid ground - wheels, outriggers; blocking, pads, clear slewing area with load, work area cordoned off Worksite procedures include manufacturer's procedures, operators manuals and site operational requirements, or similar procedures |
Specific Outcomes and Assessment Criteria: |
SPECIFIC OUTCOME 1 |
Demonstrate knowledge of the functions of a cab controlled overhead crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The main functions of Cab Controlled Overhead Crane's are explained in terms of manufacturer's specifications. |
ASSESSMENT CRITERION 2 |
The operation of all major components is explained in terms of their functions |
ASSESSMENT CRITERION 3 |
All safety features and warning devices on the crane are identified, and their purposes explained in accordance with manufacturer's specifications |
ASSESSMENT CRITERION 4 |
The maximum operating capacities are explained in terms of the designed crane capabilities |
ASSESSMENT CRITERION 5 |
Warnings from crane indicators and gauges are explained according to manufacturer's specifications |
ASSESSMENT CRITERION 6 |
Corrective actions are described or demonstrated in terms of neutralising warnings received |
SPECIFIC OUTCOME 2 |
Identify the safety and suitability of the crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Demonstrate the ability to identify the suitability of the crane prior to utilisation |
ASSESSMENT CRITERION 2 |
Demonstrate ability to assess operational capability of lifting equipment (e.g. correct SWL of slings etc). |
ASSESSMENT CRITERION 3 |
Demonstrate an understanding of the influence of load/range characteristics, manufacturers' requirements and environmental conditions. |
ASSESSMENT CRITERION 4 |
Demonstrate an understanding of what constitutes safety in the broader working environment, and when operating a Cab Controlled Overhead crane in compliance with statutory regulations. |
SPECIFIC OUTCOME 3 |
Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
Pre-operational checks are carried out according to appropriate checklist. |
ASSESSMENT CRITERION 2 |
Daily and weekly operator maintenance is performed according to the appropriate post-operational checklist and recordkeeping using a logbook |
ASSESSMENT CRITERION 3 |
Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications. |
ASSESSMENT CRITERION 4 |
Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified. |
SPECIFIC OUTCOME 4 |
Operate a cab controlled overhead crane. |
ASSESSMENT CRITERIA |
ASSESSMENT CRITERION 1 |
The purpose of the various controls is explained in accordance with their designed use. |
ASSESSMENT CRITERION 2 |
Functions of the various controls are demonstrated in accordance with the manufacturer's specifications. |
ASSESSMENT CRITERION 3 |
Controls are used to effectively manoeuvre the crane within manufacturer's specifications. |
ASSESSMENT CRITERION 4 |
Safe working procedures are followed according to manufacturer's specifications, site specific and statutory requirements. |
ASSESSMENT CRITERION 5 |
Crane performance is monitored and corrective action is taken when necessary, in accordance with manufacturer's manual. |
ASSESSMENT CRITERION 6 |
Crane is operated without risk of damage or loss to Crane or property, or injury to people. |
ASSESSMENT CRITERION 7 |
Hazards specific to operating a Cab Controlled Overhead Crane's and ways to minimise these are explained in terms of potential damage to Crane and property, and injury to people. |
ASSESSMENT CRITERION 8 |
Start-up and shutdown procedures are followed according to manufacturer's manual |
ASSESSMENT CRITERION 9 |
Crane is parked according to manufacturer's and company / site requirements. |
UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS |
UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE |
UNIT STANDARD DEVELOPMENTAL OUTCOME |
N/A |
UNIT STANDARD LINKAGES |
N/A |
Critical Cross-field Outcomes (CCFO): |
UNIT STANDARD CCFO IDENTIFYING |
Identify and solve problems
Evident in the following specific outcomes and assessment criteria: Demonstrate Knowledge of the Functions of a Cab Controlled Overhead Crane |
UNIT STANDARD CCFO WORKING |
Work effectively with others
Evident in the following specific outcomes and assessment criteria: Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane > Checklist is completed according to worksite procedures and corrective action taken if required, ensuring compliance with manufacturer's specifications. |
UNIT STANDARD CCFO ORGANISING |
Employ self management
Evident in the following specific outcomes and assessment criteria: Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane |
UNIT STANDARD CCFO COLLECTING |
Manage information
Evident in the following specific outcomes and assessment criteria: Demonstrate Knowledge of the Functions of a Cab Controlled Overhead Crane |
UNIT STANDARD CCFO COMMUNICATING |
Communicate effectively
Evident in the following specific outcomes and assessment criteria: Apply the recognised methods for inspecting and recording the operational fitness of all components of the crane > Appropriate measures used to rectify and/or prevent basic faults and defects in the mechanical function of the crane are identified. |
UNIT STANDARD CCFO SCIENCE |
Demonstrate scientific and technological competence
Evident in the following specific outcomes and assessment criteria: Identify the safety and suitability of the crane. |
UNIT STANDARD CCFO DEMONSTRATING |
Understand contextual world-systems
Evident in the following specific outcomes and assessment criteria: Identify the safety and suitability of the crane. Operate a Cab Controlled Overhead Crane |
UNIT STANDARD ASSESSOR CRITERIA |
N/A |
REREGISTRATION HISTORY |
As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. |
UNIT STANDARD NOTES |
N/A |
QUALIFICATIONS UTILISING THIS UNIT STANDARD: |
ID | QUALIFICATION TITLE | PRE-2009 NQF LEVEL | NQF LEVEL | STATUS | END DATE | PRIMARY OR DELEGATED QA FUNCTIONARY | |
Elective | 66029 | General Education and Training Certificate: Chemical Operations | Level 1 | NQF Level 01 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 48961 | National Certificate: Construction: Crane Operations | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | CETA |
Elective | 59729 | National Certificate: Mechanical Handling (Rigging) | Level 2 | NQF Level 02 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 48794 | National Certificate in Quality Checking of Tyres and Tyre Components | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 71989 | National Certificate: Automotive Components: Manufacturing and Assembly | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 58862 | National Certificate: Electro-Mechanical Winding | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 58720 | National Certificate: Engineering Fabrication | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 64829 | National Certificate: Lifting Machine Operations | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | TETA |
Elective | 23255 | National Certificate: Mechanical Engineering: Fitting and Machining | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 91926 | National Certificate: Mechanical Engineering: Machining and Tooling | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 67609 | National Certificate: Mechatronics | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 79666 | National Certificate: Metal and Engineering Manufacturing Processes | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 64190 | National Certificate: Metals Production | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
Elective | 49449 | National Certificate: Plastics Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 36155 | National Certificate: Polymer Composite Fabrication | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 79407 | National Certificate: Polymer Compound Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 21012 | National Certificate: Power and Telecommunication Cable Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 24217 | National Certificate: Thermoplastic Fabrication | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 48798 | National Certificate: Tyre and Tyre Component Manufacturing | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 48795 | National Certificate: Tyre Assembly | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | MERSETA |
Elective | 57886 | National Certificate: Welding Application and Practice | Level 3 | NQF Level 03 | Passed the End Date - Status was "Reregistered" |
2023-06-30 | As per Learning Programmes recorded against this Qual |
PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: |
This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here. |
1. | AA Technical Services (PTY) LTD |
2. | AAH Skills and Development |
3. | ACT SKILLS DEVELOPMENT |
4. | Adimire Operators Skills Training Centre |
5. | AETA Training Solutions |
6. | Akane Training Academy |
7. | Alika Investment CC |
8. | Arcelor Mittal Steel Vanderbijlpark |
9. | Automotive Training Academy Lifting Equipment (pty)Ltd |
10. | Aveng Grinaker -LTA Civil Engineering |
11. | Bakubung Driver Training and consultants CC |
12. | Bayteck Fire cc |
13. | Bessonic Investments |
14. | Biva Investments (Pty) Ltd |
15. | BJS FORKLIFTS TRAINING |
16. | Cathy Hill Solutions (Pty) Ltd |
17. | Certified Training Solutions (PTY) Ltd |
18. | Certified Training Solutions PTY Ltd |
19. | ChamCham Corporation (PTY) Ltd |
20. | CHAMDOR DRIVER TRAINING CC |
21. | Circleway College |
22. | CLEO |
23. | Continuous Development Training |
24. | Culmen Wes-Kaap CC |
25. | Dee-Bravo Training Centre |
26. | Die Mnyandoro''s G.M. Agency (Pty) Ltd |
27. | Diversity technology Training Institute |
28. | DQ Staffing Solutions |
29. | Dreyer & Dreyer Risk Solutions |
30. | Drive for Africa Training and Evaluation |
31. | Driven Machinery Training Services cc |
32. | Econo Driver Training |
33. | Edu Wize Group Pty Ltd |
34. | Educon Training and Development PTY LTD |
35. | Enstra Learning and Development Centre (Pty) Ltd |
36. | Excellect 209 (PTY) LTD |
37. | Excellect 209 PTY LTD |
38. | Exclusive Training and Services |
39. | Exclusive Training Services |
40. | G T Training Service Provider |
41. | GijimaAst Holdings (Pty) Ltd |
42. | GijimaAst Holdings Pty Ltd |
43. | GREENRIM TRAINING PTY LTD |
44. | Hazchemwize (PTY) Ltd |
45. | He and She Driver Training Centre |
46. | Human Resources Education Training & Development |
47. | Humrec Human Resource Training |
48. | Ikage SD College (Pty) Ltd |
49. | Iyanda Holdings(Pty) Ltd |
50. | Jonoglo (Pty) Ltd |
51. | Khabanyane Training and development |
52. | Khamafi Training cc |
53. | kholwa management and training consultancy (pty) Ltd |
54. | Kriel Training (PTY) LTD |
55. | Kulika Training and Consultancy Pty Ltd |
56. | Learning Exchange Pty (Ltd) |
57. | Licence Wise |
58. | Lifting Machinery Training |
59. | Lifting Operator Training Centre cc |
60. | LTM Training & Remote Learning Solutions |
61. | LTM Training and Remote Learning Solutions |
62. | MadibengGeneral Suppliers |
63. | Magas Training and Development (Pty) Ltd |
64. | Marholeni M Trading Enterprize |
65. | Matovu Training Center |
66. | Mectom Skills Development and Training |
67. | Mega Lifting Training Solutions (Pty) Ltd |
68. | Merrod Trading 122 Pty Ltd |
69. | Miclos Trading (Pty) Ltd |
70. | MMTI Holdings |
71. | Mnce Trading cc |
72. | Mobile Training cc |
73. | Mphatlalatsane Learning Resources |
74. | Mpofu Engineering Projects |
75. | MZANSI TECHNICAL COLLEGE |
76. | Mziphela Training and Projects Pty. Ltd |
77. | NDWAMATO TRAINING SOLUTIONS (PTY) LTD |
78. | Ndwamato Training Solutions PTY LTD |
79. | Nelko Training MP (Pty) Ltd |
80. | Nirvana Training Academy |
81. | Nowethu Learning Institute cc |
82. | NS Traders |
83. | OHS Legislative Training CC |
84. | OHSTEC |
85. | OSR Trading |
86. | Phephani Learnerships cc |
87. | PPLE Group Pty Ltd |
88. | Precision skills development and training |
89. | Primeserv Corporate Solutions (Pty) Ltd |
90. | Pro Skills Development (Pty) Ltd |
91. | Protrain Solutions |
92. | Quantum Leap College Pty Ltd |
93. | Renntek Pty Ltd |
94. | Safety Haz Training (PTY) Ltd |
95. | Scaw Metals |
96. | Sediba Sabasadi Skills Training Academy (Pty) Ltd |
97. | Seng''khona Trading Enterprise 129 cc |
98. | Seshego Risk Management Solutions (Pty) Ltd |
99. | Sisabenza Operator Training (PTY) LTD |
100. | Siyashayela Training and Development |
101. | Sparkling Touch Holdings |
102. | Sqalile Trading and Projects |
103. | Staffing Logistics |
104. | Starcrow 36 Bk |
105. | Strat Training |
106. | Striving Mind Academy and Consultancy Pty Ltd |
107. | SVA Training |
108. | Tamar Academy (Pty) Ltd |
109. | The Assessment Zone (Pty) Ltd |
110. | Thwala Training Services (Pty) Ltd |
111. | Training Consultant and SD College |
112. | Trainsure -Tsebo Traiding cc |
113. | Transnet Rail Engineering Bloemfontein Centre |
114. | Transnet Rail Engineering UitenhageTraining Centre |
115. | Transnet SOC Ltd - Rail Engineering Bloemfontein Training Centre |
116. | Transvaal Legislative Training |
117. | Transvaal Training |
118. | Truck Crane Training Specialists |
119. | True-Blue Training (Pty) Ltd |
120. | Tshireletso Multi-skills and Training |
121. | Uplift Quality Solutions Pty Ltd |
122. | Uthingo Training Centre |
123. | Uzoyithola Training and Consulting |
124. | Various Aligned Safety And Training |
125. | Vhonisani Training Academy & Projects |
126. | Wheelman S A |
127. | Wild Boar Fire cc |
All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source. |