SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Peg plant stations for macadamia orchards 
SAQA US ID UNIT STANDARD TITLE
115793  Peg plant stations for macadamia orchards 
ORIGINATOR
SGB Secondary Agriculture: Processing 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 01 - Agriculture and Nature Conservation Secondary Agriculture 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
A learner who has achieved this unit standard will be competent in:
Pegging without supervision to ensure correct holing of plant stations for planting of macadamia trees. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
To enter a learning program for this unit standard or to be assessed against this unit standard, the learner is assumed to have:
Literacy, numeracy and communication skills at or equivalent to NQF level 2.
An understanding of general safety in the work place at NQF level 2. 

UNIT STANDARD RANGE 
The scope of this unit standard deals with the pegging of plant stations for holing of macadamia trees.

The specific outcomes as reflected in this unit standard are performed without direct supervision, but with access to standard working procedures and operating instructions. 

Specific Outcomes and Assessment Criteria: 

SPECIFIC OUTCOME 1 
Mark along contours. 
OUTCOME NOTES 
Placing pegs on contour line at predetermined spacing according to standard working procedures and policies.

Pegging successive lines at predetermined spacing according to standard working procedures and policies. 

ASSESSMENT CRITERIA
 

ASSESSMENT CRITERION 1 
Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

Purpose of:
  • Pegging plant stations

    Consequences of not:
  • Pegging out plant stations along contours correctly.
  • Establishing straight line across contour.
  • Pegging out plant stations across contours correctly.
  • Adhering to safety procedures 

  • SPECIFIC OUTCOME 2 
    Prepare for marking process. 
    OUTCOME NOTES 
  • Preparing the work area according to standard working and safety procedures.
  • Determining a sequence of operations according to standard working procedures.
  • Selecting appropriate tools and equipment according to standard working and quality procedures.
  • Selecting appropriate personal protective equipment (PPE) according to statutory requirements. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Purpose of:
  • Pegging plant stations

    Consequences of not:
  • Pegging out plant stations along contours correctly.
  • Establishing straight line across contour.
  • Pegging out plant stations across contours correctly.
  • Adhering to safety procedures 

  • SPECIFIC OUTCOME 3 
    Mark across contours. 
    OUTCOME NOTES 
  • Establishing a straight line across contour according to prescribed procedure and policies.
  • Placing pegs for plant stations on straight line across contour at predetermined spacing according to standard working procedures and policies.
  • Pegging successive lines for plant stations at predetermined spacing according to standard working procedures and policies. 

  • ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Assessors will observe, confirm and evaluate evidence that will indicate that learners have demonstrated competence in each of the specific outcomes. In this unit standard the following specific criteria should be used:

    Purpose of:
  • Pegging plant stations

    Consequences of not:
  • Pegging out plant stations along contours correctly.
  • Establishing straight line across contour.
  • Pegging out plant stations across contours correctly.
  • Adhering to safety procedures 


  • UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An individual wishing to be assessed against this unit standard may apply to an assessor accredited by SETASA.
  • Any training provider offering learning that will enable achievement of this unit standard must be registered and accredited by SETASA.
  • Moderation of assessment will be done by SETASA in its ETQA capacity at its discretion 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Basic knowledge of the safe handling of tools and equipment related to pegging of plant stations.
  • Basic knowledge of relevant tools and equipment for pegging plant stations.
  • Basic principles of pegging of plant stations.
  • Basic knowledge of land survey equipment for pegging of plant stations. 

  • UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO WORKING 
    Work effectively with others when pegging plant stations. 

    UNIT STANDARD CCFO ORGANISING 
    Organise and manage one-self when performing pegging plant stations for planting of macadamia trees. 

    UNIT STANDARD CCFO COMMUNICATING 
    Communicate with others by reporting deviations in pegging of plant stations. 

    UNIT STANDARD CCFO DEMONSTRATING 
    Understand the world as a set of related systems by understanding the impact of incorrect pegging and the impact of incorrect plant population per Ha on the profitability and sustainability of the organisation. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Values
    All learners should demonstrate :

    An application of company ethics, values as well as general safety and customer care principles.

    An awareness of expectations and obligations of basic worker / management / customer relationships. 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  48892   National Certificate: Macadamia Production and De-husking  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  AgriSETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.