SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Identify, handle and assemble medium / high voltage line hardware and related materials 
SAQA US ID UNIT STANDARD TITLE
113872  Identify, handle and assemble medium / high voltage line hardware and related materials 
ORIGINATOR
SGB Electrical Engineering & Construction 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Electrical Infrastructure Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  4 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 		 2007-04-03  2009-02-18  SAQA 0160/05 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2010-02-18   2013-02-18  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard is replaced by: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
258922  Identify, handle and assemble Medium or High Voltage line hardware and related materials  Level 2  NQF Level 02  4   

PURPOSE OF THE UNIT STANDARD 
This unit standard is for persons working in the Electrical Engineering and Distribution environment.
A person credited with this unit standard will be able to:
  • Identify, handle and assemble Medium / High Voltage line hardware and related materials on site.

    This unit standard will contribute to the full development of the learner within the Electrical Engineering and Distribution environment.The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and upliftment within the Electrical Infrastructure Construction environment. 
    		•

    LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The following knowledge, skills attitude and / or equivalent:
  • Basic hand tools
  • Personal protective equipment
  • Housekeeping (including stacking & storing)
  • Basic rigging
  • Environmental awareness 
    		•

    UNIT STANDARD RANGE 
    This unit standard applies to persons working with, handling and assembling Medium / High Voltage line hardware and related equipment independently.
  • Hardware will include, but are not limited to wood pole structures, conductive elements, stays & struts, insulators, clamps, bolts and pre-formed products.
  • Equipment will include, but are not limited to Medium Voltage pole mounted isolators, breakers, sectionalisers, transformers, re-closers and surge arrestors.
  • Related material will include, but are not limited to cleaning materials / solvents, special lubricants, insulating oil.
  • Assembly will include dressing of poles / structures and cross-arms. 
    		•

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Identify and handle the appropriate medium / high voltage line hardware. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Instructions are interpreted and carried out as per job requirement. 

    ASSESSMENT CRITERION 2 
    2. Hardware identified as per instruction. 

    ASSESSMENT CRITERION 3 
    3. Personal protective equipment worn when handling hardware as per safe work procedures. 

    ASSESSMENT CRITERION 4 
    4. Hardware selected and handled as per work instruction / manufacturer`s requirements, applying basic rigging principles if required. 

    SPECIFIC OUTCOME 2 
    Identify & handle the appropriate medium voltage equipment. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Instructions are interpreted and carried out as per job requirement. 

    ASSESSMENT CRITERION 2 
    2. Equipment identified as per instruction. 

    ASSESSMENT CRITERION 3 
    3. Personal protective equipment worn when handling hardware as per safe work procedures. 

    ASSESSMENT CRITERION 4 
    4. Hardware selected and handled as per work instruction / manufacturer`s requirements, applying basic rigging principles if required. 

    SPECIFIC OUTCOME 3 
    Assemble medium / high voltage line hardware. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Work site / area prepared according to worksite procedures. 

    ASSESSMENT CRITERION 2 
    2. Personal protective equipment worn when assembling hardware as per safe work procedures. 

    ASSESSMENT CRITERION 3 
    3. Assemble hardware in logical sequence as per manufacturer`s specifications and job requirements. 

    ASSESSMENT CRITERION 4 
    4. Work site / area to be left in order as per environmental legislation. 

    SPECIFIC OUTCOME 4 
    Identify and handle related materials used during medium / high voltage line hardware assembly. 

    ASSESSMENT CRITERIA     

    ASSESSMENT CRITERION 1 
    1. Related materials identified as per job requirements. 

    ASSESSMENT CRITERION 2 
    2. Environmental requirements of applicable related materials are adhered to. 

    ASSESSMENT CRITERION 3 
    3. Personal protective equipment worn when handling related materials as per safe work procedures. 

    ASSESSMENT CRITERION 4 
    4. Related materials selected and handled as per manufacturer`s specifications and job requirements. 

    ASSESSMENT CRITERION 5 
    5. Waste materials disposed of as per environmental requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
    Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA. 

    UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • A basic understanding of assembling the relevant hardware.
  • A broad understanding of the application and purpose of hardware and related materials.
  • A basic understanding of the relevant procedures and practices relating to handling and assembling. 
    		•

    UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO COLLECTING 
    Collect, evaluate, organise and critically evaluate information related to medium / high voltage line hardware and related materials so that these are accurately interpreted into application performance standards. 

    UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    UNIT STANDARD NOTES 
    This unit standard has been replaced by unit standard 258922, which is "Identify, handle and assemble Medium or High Voltage line hardware and related materials", Level 2, 4 credits.

    Supplementary information:

    Specified requirements

    Specified requirements include legal and legislative specific requirements and are contained in one or more of the following documents:
    OHS Act
    Environmental Act
    ISO Standards 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Elective  48473   National Certificate: Electrical Engineering  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered"     		 2009-02-18  Was EWSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 


    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.