SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Demonstrate an understanding of instrumentation calibration, terminology and standards 
SAQA US ID UNIT STANDARD TITLE
262489  Demonstrate an understanding of instrumentation calibration, terminology and standards 
ORIGINATOR
SGB Generic Manufacturing, Engineering, Technology 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Engineering and Related Design 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
People credited with this unit standard are able to:
  • Define terms used in instrument calibration.
  • Define and explain calibration standards.

    This unit standard will contribute to the full development of the learner within the Measurement Control and Instrumentation environment by providing recognition, further mobility and transportability within the field of Manufacturing Engineering and Technology. The skills, knowledge and understanding demonstrated within this unit standard are essential for the social and economic transformation within the industry. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    The following knowledge, skills attitude and/or equivalent:
  • Safety procedures according to statutory and manufacturer requirements.
  • Basic electrical safety.
  • Use of hand tools and test equipment. 

  • UNIT STANDARD RANGE 
    Measurement sources include, but are not limited to:
  • Displacement type, Ultrasonic, Differential pressure equipment, Radar, Magnetic, Capacitance.
  • Maintenance of field equipment includes but is not limited to removing, calibrating and installing.
  • Safety precautions include the use of all personal protective equipment, electrical and fire protection and process isolation.
  • Statutory and standardisation requirements include but are not limited to SANS, CSIR, OHS Act and manufacturer's specifications. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Define terms used in instrument calibration. 
    OUTCOME RANGE 
    Mechanical and analogue. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The term 'Range' is explained and contextualised to given scenarios. 
    ASSESSMENT CRITERION RANGE 
    Lower range value, upper range value.
     

    ASSESSMENT CRITERION 2 
    The term 'Span' is explained and contextualised to given scenarios. 
    ASSESSMENT CRITERION RANGE 
    Upper range value, lower range value.
     

    ASSESSMENT CRITERION 3 
    The term 'Zero elevation' is explained and contextualised to given scenarios. 

    ASSESSMENT CRITERION 4 
    The term 'Zero suppression' is explained and contextualised to given scenarios. 

    ASSESSMENT CRITERION 5 
    The term 'Linearity' is explained and contextualised to given scenarios. 

    ASSESSMENT CRITERION 6 
    Calibration terms are explained in terms of their applicability to different situations. 
    ASSESSMENT CRITERION RANGE 
    Including but not limited to error, accuracy, hysteresis, dead band, repeatability, reproducibility.
     

    SPECIFIC OUTCOME 2 
    Define and explain calibration standards. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Primary measurement standards are defined in terms of international recognition criteria. 
    ASSESSMENT CRITERION RANGE 
    Internationally traceable standards, melting point of tin, triple point of water, boiling point of water.
     

    ASSESSMENT CRITERION 2 
    Secondary measurement standards are defined in terms of international recognition criteria. 
    ASSESSMENT CRITERION RANGE 
    Dead weight tester, precision traceable resistance temperature detector.
     

    ASSESSMENT CRITERION 3 
    Differences between primary and secondary measurement standards are described in terms of their functions and application. 

    ASSESSMENT CRITERION 4 
    Methods of obtaining required measurement results are described in accordance with international best practice. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable achievement of this unit standard must be accredited as a provider through the relevant ETQA by SAQA.
  • Moderation of assessment will be overseen by the relevant ETQA according to the moderation guidelines in the relevant qualification and the agreed ETQA procedures. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Different terms used in calibration and their meaning.
  • How to apply the terms in different contexts.
  • Differences between primary and secondary measurement standards.
  • How to obtain required measurement results in different situations. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identification and problem solving skills:
  • Deviations from standards identified and reported. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others:
  • Working under supervision and as a member of a team of mechanicians maintaining instrumentation. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communication skills:
  • Interpreting and communicating w.r.t standards. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, showing responsibility towards the environment and health of others:
  • Principles of calibration and standardisation. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Details of standards relating to primary and secondary measurement can be obtained from SABS or equivalent.

    This unit standard will be used in conjunction with the unit standards dealing with: temperature, flow, pressure, level, and equipment associated with final control elements.

    Abbreviations:
  • SANS: South African National Standards.
  • CSIR: Centre for Scientific and Industrial Research.
  • OHS Act: Occupational, Health and Safety Act, Act 81 of 1995. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  74530   National Certificate: Measurement, Control and Instrumentation  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  As per Learning Programmes recorded against this Qual 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.