SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Set single stones in jewellery 
SAQA US ID UNIT STANDARD TITLE
261357  Set single stones in jewellery 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard replaces: 
US ID Unit Standard Title Pre-2009 NQF Level NQF Level Credits Replacement Status
15281  Set stones in claw settings  Level 3  NQF Level 03   

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to people who are being introduced to basic single stone setting.

People credited with this unit standard are able to:
  • Plan and prepare to seat the gemstone.
  • Seat and set the gemstone.
  • Apply the desired finish. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in:
  • Communication and Mathematical Literacy at NQF Level 1. 

  • UNIT STANDARD RANGE 
    The following range applies to this unit standard:

    The learner must select one of the following gemstone setting techniques:
  • Set a stone in a tube setting.
  • Set a stone in a claw setting.
  • Raise beads to set a stone.

    Stones to be set include cabochon and faceted stones. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Plan and prepare to seat the gemstone. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools, materials and equipment are identified and their functions described in terms of specified requirements. 

    ASSESSMENT CRITERION 2 
    Tools, materials and equipment are selected and prepared in accordance with task specific requirements. 

    ASSESSMENT CRITERION 3 
    The stone is inspected for suitability for seating and corrective action is taken in accordance with industry quality standards. 

    ASSESSMENT CRITERION 4 
    Tools, materials and equipment are used and maintained according to manufacturer's specification and site-specific requirements. 

    ASSESSMENT CRITERION 5 
    Occupational hazards and risks are identified and dealt with in accordance with specified requirements. 

    ASSESSMENT CRITERION 6 
    Housekeeping and safe working practices are adhered to and demonstrated in accordance with occupational health and safety requirements. 

    ASSESSMENT CRITERION 7 
    The consequences of not adhering to correct workmanship, housekeeping and safe working practices are described in terms of the potential impact on occupational health and safety, productivity and quality. 

    SPECIFIC OUTCOME 2 
    Set the gemstone. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools, materials and equipment are selected, prepared and used in accordance with task specific requirements. 

    ASSESSMENT CRITERION 2 
    The seat for the stone is prepared according to jewellery manufacturing requirements. 

    ASSESSMENT CRITERION 3 
    The stone is secured in the setting according to task specific requirements. 

    ASSESSMENT CRITERION 4 
    Housekeeping and safe working practices are adhered to and demonstrated in accordance with occupational health and safety requirements. 

    ASSESSMENT CRITERION 5 
    The consequences of not adhering to correct workmanship, housekeeping and safe working practices are described in terms of the potential impact on occupational health and safety, productivity and quality. 

    SPECIFIC OUTCOME 3 
    Apply the desired finish. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Tools, materials and equipment are selected, prepared and used in accordance with specified requirements. 

    ASSESSMENT CRITERION 2 
    The finish is executed according to jewellery manufacturing requirements. 

    ASSESSMENT CRITERION 3 
    The job is completed according to workplace specified requirements. 

    ASSESSMENT CRITERION 4 
    Housekeeping and safe working practices are adhered to and demonstrated in accordance with occupational health and safety requirements. 

    ASSESSMENT CRITERION 5 
    The consequences of not adhering to correct workmanship, housekeeping and safe working practices are described in terms of the potential impact on occupational health and safety, productivity and quality. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:

    Knowledge related to setting single stones:
  • Knowledge of the different types of setting techniques.
  • Knowledge of the setting tools, materials and equipment.
  • Knowledge of Basic gem identification.

    Processes and events:
  • Knowledge of various gemstone setting processes.
  • Exposure to various gemstone setting processes.
  • Distinguish poor gemstone setting quality from acceptable quality.

    Causes and effects (Safety and Health):
  • Use of equipment.
  • Use of personal protective equipment.
  • Adherence to safety requirements.
  • Work related hazards and associated risks.

    Regulations, legislation, agreements, policies and standards:
  • Safety, health and environmental legislation and regulations.
  • Quality policies, standards and agreements. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems and make decisions using critical and creative thinking.

    Note:
  • The ability of the learner to set single stones and to determine the optimal configuration of requires critical and creative thinking to solve problems. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as members of a team, group, organisation or community.

    Note:
  • The ability and willingness of the learner to liaise with relevant members of the production team indicates the ability to work effectively in a team. 

  • UNIT STANDARD CCFO ORGANISING 
    Organise and manage themselves and their activities responsibly and effectively.

    Note:
  • The security and accountability for gemstones and the complying with good housekeeping and security practices indicates the learner's ability to organise and manage activities in the work environment. 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Note:
  • The ability of the learner to incorporate the gemstones into jewellery requires the assimilation of a variety of information. This indicates the learner's ability to analyse, organise and critically evaluate information. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.

    Note:
  • The ability of the learner to demonstrate the potential outcome of gemstones setting indicates the learner's ability to communicate effectively through visual and language skills. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.

    Note:
  • The ability to use appropriate tools and equipment to set gemstones, demonstrates the critical use of science and technology in the processing of information and the safeguarding of the material, the environment, fellow workers and oneself. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

    Note:
  • The ability to relate the envisaged gem encrusted jewel to market valuation requires understanding of the forces of supply, manufacturing, finance and supply requiring problem solving to be assessed against a set of related systems which are dynamic in nature. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    This unit standard replaces unit standard 15281, "Set stones in claw settings", Level 3, 7 credits.

    Terminology:
  • Tubes: A hollow metal cylinder into which stones are set (Also known as chenier, bezel, or box).
  • Claws: Rods of metal that face upwards to hold (embed) a stone. Claws are also known as prongs in the industry.
  • Beads: Small burs of metal that are raised by digging the scorper into the metal and lifting it.

    Specified Requirements:

    Specified requirements include legal and workplace specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health and Safety Act, 1996 (Act no 29/1996), and Minerals Act and Regulations, 1991 (Act no 50/1991).
  • Regulations.
  • Mandatory Codes of Practice.
  • SANS and other Standards.

    Site Specific:
  • Hazard Identification and Risk Assessment (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Voluntary Codes of Practices.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH and S Risks.

    Jewellery Industry Requirements:
  • Working Guides.
  • User manuals supplied by equipment manufacturer.
  • The Bargaining Council for the Jewellery and Precious Metals Industry Main Agreement.
  • The employer's work specifications, tariff agreements and policies and Procedures.
  • Regulations as per directives from the Gold and Diamond Branch of the Southern African Police.
  • ISO 9000/1, SANS and other accredited standards and quality assurance measures.
  • A glossary of terms regarding the terminology of the Jewellery Industry. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  65049   National Certificate: Jewellery Manufacturing  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.