SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Demonstrate an understanding of support principles 
SAQA US ID UNIT STANDARD TITLE
252696  Demonstrate an understanding of support principles 
ORIGINATOR
SGB Mining and Minerals 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Fabrication and Extraction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
This unit standard will be useful to Rock Engineering personnel who are responsible to audit excavation stability.

People credited with this unit standard are able to:
  • Demonstrate knowledge of support principles.
  • Demonstrate understanding of the importance of support principles.
  • Demonstrate knowledge of the application of support principles.

    The skills, knowledge and understanding demonstrated within this unit standard are essential for social and economic transformation and contribute to the upliftment and economic growth of the mining and minerals sector.

    This unit standard is intended to promote general skills, knowledge and demonstrating a basic understanding of supporting principles in the mining and minerals sector in order to ensure knowledgeable and informed workers. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    It is assumed that learners are already competent in the following:
  • Outcomes related to National Introductory Certificate to Mining and Minerals (NQF Level 1).
  • Achieve mining excavation stability with support installation in the applicable geotechnical environment at NQF Level 1. 

  • UNIT STANDARD RANGE 
    N/A 

    Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Demonstrate knowledge of support principles. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    An explanation of the concept of "Support Principle" is provided in the geotechnical context. 

    ASSESSMENT CRITERION 2 
    Explanations of support principles are provided in terms of the geotechnical context. 
    ASSESSMENT CRITERION RANGE 
  • Beam creation.
  • Suspension.
  • Containment.
  • Confinement.
  • Load distribution.
     

  • ASSESSMENT CRITERION 3 
    Additional concepts relevant to the support principles are explained in the geotechnical context. 
    ASSESSMENT CRITERION RANGE 
  • Zone of influence.
  • Areal coverage.
  • Tributary area.
  • Factor of safety.
     

  • SPECIFIC OUTCOME 2 
    Demonstrate understanding of the importance of support principles. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The importance to understand rock and support behaviour is explained in the context of designing support. 

    ASSESSMENT CRITERION 2 
    The practice of allowing support design processes to ignore support principles is explained in terms of consequences to production and safety. 

    SPECIFIC OUTCOME 3 
    Demonstrate knowledge of the application of support principles. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Support design methodologies are described in the context of mining operations. 
    ASSESSMENT CRITERION RANGE 
  • Fall out thickness.
  • Block size.
  • Support resistance.
  • Energy absorption.
  • Pillar strength and stress.
     

  • ASSESSMENT CRITERION 2 
    The link between support principles and support design methodologies is explained in the context of mining operations. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard registered as an assessor with the relevant Education, Training, Quality, Assurance (ETQA) Body must be, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant Education, Training, Quality, Assurance (ETQA) Body, or with an ETQA that has a Memorandum of Understanding with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant Education, Training, Quality, Assurance (ETQA) Body, or by an ETQA that has a Memorandum of Understanding with the relevant ETQA, according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments, unless ETQA policies specify otherwise.
  • Anyone wishing to be assessed against this unit standard may apply to be assessed by any assessment agency, assessor or provider institution that is accredited by the relevant ETQA. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The following embedded knowledge is addressed in an integrated way in the unit standard:
  • The concept of "Support Principle".
  • Basic understanding of support principles.
  • Basic understanding of additional concepts relevant to the support principles.
  • Understanding of rock and support behaviour.
  • Consequences of allowing support design processes to ignore support principles.
  • Basic knowledge of the application of support principles.

    Regulations, legislation, agreements, policies and standards:
  • Safety, health and environmental legislation and regulations.
  • Quality policies, standards and agreements. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.
  • Note: The ability of the learner to explain the applicable support principle for a given situation. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively, using visual, mathematical and/or language skills in the modes of oral and/or written presentations.
  • Note: The appropriate communication with other personnel with regard to the need for support standards and the logic behind the design of standards. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically showing responsibility towards the environment and health of others.
  • Note: The use of science and technology is promoted through the use of new support design methodologies. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.
  • Note: The effect of the application of an incorrect support principle to the support design process on the safety of mining personnel is confirmed. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    Terminology:

    Specified Requirements:

    Specified requirements include legal and site-specific requirements and are contained in one or more of the following documents:

    Legal:
  • Relevant Acts: e.g. Mine Health & Safety Act and Regulations, 1996 (Act 29/1996), and Minerals Act and Regulations, 1991 (Act 50/1991).
  • Mandatory Codes of Practice.
  • SANS and other relevant Standards.
  • Chief Inspector of Mines' Directives.
  • Guidelines issued by the Chief Inspector of Mines.

    Site-Specific:
  • Hazard Identification and Risk Assessments (HIRA).
  • Occupational Health and Safety Risk Management Programme.
  • Managerial Instructions.
  • Mine Standard Procedures.
  • List of Recorded OH&S Risks.
  • Working Guides.
  • Equipment and Materials Specifications.

    Unit Standard Justification:

    Level:

    Attribute; Level; Justification:
  • Skills; Level 2; Moderate in range.
  • Procedures; Level 3; Significant choice.
  • Context; Level 2; Routine and familiar.
  • Knowledge; Level 3; Some relevant theoretical.
  • Information processing; Level 2; Basic processing of readily available information.
  • Problem Solving; Level 3; A range of known responses to familiar problems, base on limited discretion and judgement.
  • Orientation of activities; Level 2; Directed.
  • Application of responsibility; Level 2; Some responsibility for quantity and quality, and possible responsibility for guiding others.
  • Orientation of scope of responsibility; Level 2; Under general supervision and quality control.

    Average Level: 21/9 = 2.33.
    Actual Levels Assigned = 2.

    Credits:

    Total hours required by the learner to achieve the required outcome:

    Activity; Hours:
  • Classroom Teaching; 16 Hours.
  • On-The-Job Training; 8 Hours.
  • Mentoring required; 0 Hours.
  • Other (Specify); 0 Hours.

    Total: 24 Hours.

    Credits Achieved: 24/10 = 2.4.
    Credits Assigned = 2. 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  59549   National Certificate: Strata Control Operations  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  MQA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    1. ADCORP TECHNICAL TRAINING (PTY) LTD 
    2. PALABORA COPPER (PTY) LTD 
    3. SIBANYE GOLD ACADEMY PROPRIETARY LIMITED 
    4. XTRACT TRAINING SERVICES (SA)(PTY)LTD 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.