SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Read and interpret drawings and make freehand drawings related to gas installations 
SAQA US ID UNIT STANDARD TITLE
246574  Read and interpret drawings and make freehand drawings related to gas installations 
ORIGINATOR
Chemical Industries SGB 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 06 - Manufacturing, Engineering and Technology Manufacturing and Assembly 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Reregistered" 
2018-07-01  2023-06-30  SAQA 06120/18 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2024-06-30   2027-06-30  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
Learners who demonstrate competence as described in the outcomes of this Unit Standard will understand the importance and practical application of drawings related to gas installations.

The qualifying learner is able to:
  • Explain the role of drawings and specifications.
  • Identify drawings and symbols used on a construction.
  • Read and interpret process diagrams (P&IDs).
  • Produce a dimensioned, free-hand construction site drawing of a proposed or existing gas system.
  • Apply information from drawings in construction activities.

    This unit standard will contribute to the full development of any learner within the gas installations environment, by providing recognition, further mobility and transportability within the field. The knowledge, skills and understanding demonstrated in this unit standard are essential for upliftment, social and economic transformation in the gas installation environment. 

  • LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
    Learners accessing this unit standard will have demonstrated competence against numeracy and literacy at ABET Level 4, NQF Level 1 or equivalent. 

    UNIT STANDARD RANGE 
    The typical context of this unit standard assumes an existing or new domestic or commercial gas installation site.

    The typical scope of this unit standard includes one of the following but is not limited to:
  • LPG installations.
  • Natural gas installations.
  • Compressed gas installations.
  • Medical installations.

    Range statements, which are applicable to the Unit Standard title, Specific Outcomes and Assessment Criteria are found beneath the applicable assessment criteria. 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Explain the role of drawings and specifications. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The role of drawings is explained in relation to project specifications, contract documentation, quantities and construction. 

    ASSESSMENT CRITERION 2 
    The role of specifications is explained in relation to quantities, quality of work, contract documentation and payment to contractors. 

    ASSESSMENT CRITERION 3 
    The local authorities drawing approval process is explained in terms of organisational procedures. 

    ASSESSMENT CRITERION 4 
    Proof of compliance with legal requirements is explained in terms of organisational procedures. 

    ASSESSMENT CRITERION 5 
    The purpose of drawing and revision numbers is explained in terms of utilisation of the correct drawing. 

    ASSESSMENT CRITERION 6 
    Consequences of using the wrong drawing are explained in terms of the potential hazardous results on the finished product. 

    ASSESSMENT CRITERION 7 
    Drawings are stored in a secure place in accordance with procedures. 

    SPECIFIC OUTCOME 2 
    Identify drawings and symbols used on a construction. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Drawings are identified in terms of type and application for a gas process. 

    ASSESSMENT CRITERION 2 
    Key functions of the drawing are explained in terms of the finished product. 

    ASSESSMENT CRITERION 3 
    Key users of the drawing are identified in terms of work responsibilities. 

    ASSESSMENT CRITERION 4 
    Specifications and notes are explained in terms of work requirements. 

    ASSESSMENT CRITERION 5 
    Symbols and abbreviations are interpreted in terms of their functions and meanings. 

    ASSESSMENT CRITERION 6 
    Isometric drawings are interpreted according to accepted drawing practice. 

    ASSESSMENT CRITERION 7 
    The layout is interpreted in terms of the different views shown. 

    ASSESSMENT CRITERION 8 
    The purpose of each view is explained in terms of the result of the end product. 

    SPECIFIC OUTCOME 3 
    Read and interpret process flow diagrams (P&IDs). 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The purpose of P&IDs is described in terms of gas installations. 

    ASSESSMENT CRITERION 2 
    P&IDs can be located and correctly identified in accordance with specified requirements. 

    ASSESSMENT CRITERION 3 
    Different line structures and shading concepts are explained in terms of accepted drawing practice. 

    ASSESSMENT CRITERION 4 
    Labels, symbols and legends are explained in terms of accepted drawing practice. 

    ASSESSMENT CRITERION 5 
    P&IDs are interpreted correctly in terms of equipment and flows. 

    SPECIFIC OUTCOME 4 
    Produce a dimensioned free-hand construction site drawing of a proposed or existing gas system. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    The system to be drawn is identified and measured to within required tolerances. 

    ASSESSMENT CRITERION 2 
    The drawing is produced and shows the correct dimensions. 

    ASSESSMENT CRITERION 3 
    Additional information on the drawings is supplied according to requirements. 
    ASSESSMENT CRITERION RANGE 
    Additional information includes dimensions, notes, legend and bill of materials.
     

    ASSESSMENT CRITERION 4 
    The drawing is produced using different line types and shading to represent different concepts. 

    SPECIFIC OUTCOME 5 
    Apply information from drawings in work activities. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Drawings are oriented in terms of site landmarks and the north indicator. 

    ASSESSMENT CRITERION 2 
    Information is extracted from the drawings in terms of the setting out requirements on site. 

    ASSESSMENT CRITERION 3 
    Scales are interpreted and measurements converted in terms of actual dimensions required. 

    ASSESSMENT CRITERION 4 
    Dimensions are interpreted from the drawings in terms of site requirements. 

    ASSESSMENT CRITERION 5 
    Information supplied in the notes section is interpreted in terms of the engineer's designed purpose. 

    ASSESSMENT CRITERION 6 
    Materials are identified in terms of ordering requirements. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • An assessor, accredited with a relevant NQF Level 2 or higher qualification, will assess the learner's competency.
  • Anyone assessing a learner or moderating the assessment of a learner against this Qualification must be registered as an Assessor with the relevant ETQA.
  • Direct observation in simulated or actual work conditions is required. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
    The qualifying learner understands and is able to:
  • Explain the role of drawings and specifications.
  • Identify drawings and symbols used on a construction.
  • Read and interpret process and instrument diagrams (P&IDs).
  • Produce a dimensioned free-hand construction site drawing of a proposed or existing gas system.
  • Apply information from drawings in work activities. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    The learner is able to identify and solve problems in which responses display that responsible decisions, using critical and creative thinking, have been made by:
  • Explaining the consequences of using the wrong drawing in terms of the potential hazardous results on the finished product.
  • Interpreting the layout on a drawing in terms of the different views shown.
  • Identifying materials from drawings in terms of ordering requirements.
  • Interpreting drawings correctly.

    Refer to the following Specific Outcome/s:
  • Explain the role of drawings and specifications.
  • Identify drawings and symbols used on a construction.
  • Read and interpret process and instrument diagrams (P&IDs).
  • Apply information from drawings in work activities. 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation or community by:
  • Maintaining sound relations with co-workers.

    Refer to the following Specific Outcome/s:
  • Identify drawings and symbols used on a construction.
  • Apply information from drawings in work activities. 

  • UNIT STANDARD CCFO ORGANISING 
    The learner is able to organise and manage himself and his activities responsibly and effectively:
  • Explaining the purpose of drawing and revision numbers in terms of utilisation of the correct drawing.
  • Storing drawings in a secure place in accordance with company procedures.
  • Interpreting P&IDs correctly in terms of equipment and flows.

    Refer to the following Specific Outcome/s:
  • Explain the role of drawings and specifications.
  • Read and interpret process and instrument diagrams (P&IDs). 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information by:
  • Explaining the role of drawings in relation to project specifications, contract documentation, quantities and construction.
  • Explaining key functions of the drawing in terms of the finished product.
  • Extracting information from the drawings in terms of the setting out requirements on site.

    Refer to the following Specific Outcome/s:
  • Explain the role of drawings and specifications.
  • Identify drawings and symbols used on a construction.
  • Apply information from drawings in work activities. 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively by using mathematical and/or language skills in the modes of oral and/or written presentations during:
  • Explaining specifications and notes in terms of work requirements.
  • Reading and interpreting symbols and abbreviations on drawings.
  • Reading and interpreting process flow diagrams (P&IDs).
  • Producing a dimensioned free-hand site drawing of a proposed or existing gas system.

    Refer to the following Specific Outcome/s:
  • Identify drawings and symbols used on a construction.
  • Read and interpret process and instrument diagrams (P&IDs).
  • Produce a dimensioned free-hand construction site drawing of a proposed or existing gas system. 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, showing responsibility towards the environment and health of others when:
  • Describing the purpose of P&IDs.
  • Interpreting scales and converting measurements in terms of actual dimensions required.

    Refer to the following Specific Outcome/s:
  • Read and interpret process and instrument diagrams (P&IDs).
  • Apply information from drawings in work activities. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by:
  • Explaining the role of drawings in relation to project specifications, contract documentation, quantities and construction.

    Refer to the following Specific Outcome/s:
  • Explain the role of drawings and specifications. 

  • UNIT STANDARD CCFO CONTRIBUTING 
    Contribute to the full personal development of each learner and the social and economic development of the society at large:
  • Understanding the role of drawings in gas installations and the effect it has on the growth and development of the organisation, its customers and employees.

    Refer to the following Specific Outcome/s:
  • Explain the role of drawings and specifications.
  • Identify drawings and symbols used on a construction.
  • Read and interpret process and instrument diagrams (P&IDs).
  • Produce a dimensioned free-hand construction site drawing of a proposed or existing gas system. 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    REREGISTRATION HISTORY 
    As per the SAQA Board decision/s at that time, this unit standard was Reregistered in 2012; 2015. 

    UNIT STANDARD NOTES 
    N/A 

    QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  59015   National Certificate: Gas Installations  Level 2  NQF Level 02  Passed the End Date -
    Status was "Reregistered" 
    2023-06-30  CHIETA 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.