SAQA All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.
SOUTH AFRICAN QUALIFICATIONS AUTHORITY 
REGISTERED UNIT STANDARD THAT HAS PASSED THE END DATE: 

Demonstrate knowledge of pipes, associated fittings and valves used in wastewater reticulation systems 
SAQA US ID UNIT STANDARD TITLE
115908  Demonstrate knowledge of pipes, associated fittings and valves used in wastewater reticulation systems 
ORIGINATOR
SGB Water Sector 
PRIMARY OR DELEGATED QUALITY ASSURANCE FUNCTIONARY
-  
FIELD SUBFIELD
Field 12 - Physical Planning and Construction Civil Engineering Construction 
ABET BAND UNIT STANDARD TYPE PRE-2009 NQF LEVEL NQF LEVEL CREDITS
Undefined  Regular  Level 2  NQF Level 02  10 
REGISTRATION STATUS REGISTRATION START DATE REGISTRATION END DATE SAQA DECISION NUMBER
Passed the End Date -
Status was "Registered" 
2004-06-09  2007-06-09  SAQA 0954/04 
LAST DATE FOR ENROLMENT LAST DATE FOR ACHIEVEMENT
2008-06-09   2011-06-09  

In all of the tables in this document, both the pre-2009 NQF Level and the NQF Level is shown. In the text (purpose statements, qualification rules, etc), any references to NQF Levels are to the pre-2009 levels unless specifically stated otherwise.  

This unit standard does not replace any other unit standard and is not replaced by any other unit standard. 

PURPOSE OF THE UNIT STANDARD 
The qualifying learner achieving this unit standard in combination with context expertise standard(s) will be able to differentiate between different sizes, classes and types of pipes, associated fittings, and valves used in wastewater reticulation systems including safe storage of all materials. This competence will provide the learner with the foundational knowledge required to be able to operate effectively when performing maintenance or construction tasks on a wastewater reticulation system. This will contribute towards a wastewater system that functions effectively and meets customer requirements. In acquiring this competence the qualifying learner will lay a good foundation for future learning and action, and better understand the broader context of own work. 

LEARNING ASSUMED TO BE IN PLACE AND RECOGNITION OF PRIOR LEARNING 
Mathematical calculations, communication and reading skills NQF level 1. 

UNIT STANDARD RANGE 
Pipes
  • HDPE, Asbestos Cement, uPVC, steel, stainless steel, cast iron, galvanised iron, concrete, GRP, mPVC, earthenware, Polypropylene and ductile iron

    Pipe ends
  • Spigot and socket, straight and flanged

    Associated fittings
  • Pre-cast concrete manhole rings and pre-cast bases, pre-formed plastic units and manholes, cast iron, concrete and plastic covers, asbestos cement manholes, step-irons, rodding eyes and inspection chambers, saddles, bends and junctions, couplings and traps

    Measuring devices
  • Steel ruler, tape, and callipers

    Measurements
  • Inside diameter, outside diameter, length, depth, wall thickness, ovality

    Valves
  • Non return, isolating, regulating, sluice-gate and venting resilient seal valves

    Components of valves
  • Valve body/casing, valve stem / spindle, gear box, gate, packing, packing gland 

  • Specific Outcomes and Assessment Criteria: 

    SPECIFIC OUTCOME 1 
    Identify and explain different pipe sizes, classes and types used in wastewater reticulation systems 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Measuring device is used correctly. 

    ASSESSMENT CRITERION 2 
    Pipe sizes are measured accurately to specifications. 

    ASSESSMENT CRITERION 3 
    Pipe lengths are measured accurately and visually identified. 

    ASSESSMENT CRITERION 4 
    Different types of pipes are identified. 

    ASSESSMENT CRITERION 5 
    Different classes of pipes are identified. 

    ASSESSMENT CRITERION 6 
    Pipe ends are differentiated and explained. 

    SPECIFIC OUTCOME 2 
    Identify and explain the characteristics of associated fittings in wastewater reticulation systems. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Associated fittings are identified. 

    ASSESSMENT CRITERION 2 
    The operational functions and purposes of associated fittings are explained. 

    ASSESSMENT CRITERION 3 
    Associated fittings are measured accurately. 

    ASSESSMENT CRITERION 4 
    Associated fittings are matched to relevant pipe size, type and class. 

    SPECIFIC OUTCOME 3 
    Identify and explain the types and functions of valves used on wastewater reticulation systems. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    All types of valves are identified and measured accurately. 

    ASSESSMENT CRITERION 2 
    Water works pattern is explained. 

    ASSESSMENT CRITERION 3 
    The purposes and components of the different valves are described. 

    ASSESSMENT CRITERION 4 
    The operational functions of different valves are explained. 

    ASSESSMENT CRITERION 5 
    Different sizes, classes and types of pipes, associated fittings and valves used in wastewater reticulation systems are identified and used appropriately. 

    SPECIFIC OUTCOME 4 
    Store pipes, associated fittings and valves. 

    ASSESSMENT CRITERIA
     

    ASSESSMENT CRITERION 1 
    Pipes are stacked and stored in accordance with work and safety procedures. 

    ASSESSMENT CRITERION 2 
    Fittings and valves are stacked and stored in accordance with work and safety procedures. 

    ASSESSMENT CRITERION 3 
    Correct methods of handling pipes, associated fittings and valves are demonstrated. 


    UNIT STANDARD ACCREDITATION AND MODERATION OPTIONS 
  • Anyone assessing a learner or moderating the assessment of a learner against this unit standard must be registered as an assessor with the relevant ETQA.
  • Any institution offering learning that will enable the achievement of this unit standard must be accredited as a provider with the relevant ETQA.
  • Assessment and moderation of assessment will be overseen by the relevant ETQA according to the ETQA's policies and guidelines for assessment and moderation.
  • Moderation must include both internal and external moderation of assessments at exit points of the qualification, unless ETQA policies specify otherwise. Moderation should also encompass achievement of the competence described both in individual unit standards as well as the integrated competence described in the qualification. 

  • UNIT STANDARD ESSENTIAL EMBEDDED KNOWLEDGE 
  • Different types of measuring devices and their uses.
  • Tools and equipment needed for repairs and maintenance.
  • The importance of using the correct tools when working with valves.
  • Different sizes, types and application of manholes including the appropriate covers.
  • Storage and handling procedures.
  • Safety considerations when handling pipes, fittings, valves and tools. 

  • UNIT STANDARD DEVELOPMENTAL OUTCOME 
    N/A 

    UNIT STANDARD LINKAGES 
    N/A 


    Critical Cross-field Outcomes (CCFO): 

    UNIT STANDARD CCFO IDENTIFYING 
    Identify and solve problems in which responses display that responsible decisions using critical and creative thinking have been made.

    Assessment criteria:
  • None 

  • UNIT STANDARD CCFO WORKING 
    Work effectively with others as a member of a team, group, organisation, and community.

    Assessment criteria:
  • None 

  • UNIT STANDARD CCFO ORGANISING 
    Plan, organise and manage oneself and one's activities responsibly and effectively.

    Assessment criteria:
  • None 

  • UNIT STANDARD CCFO COLLECTING 
    Collect, analyse, organise and critically evaluate information.

    Assessment criteria:
  • All 

  • UNIT STANDARD CCFO COMMUNICATING 
    Communicate effectively using visual, mathematical and/or language skills in the form of oral and/or written presentation.

    Assessment criteria:
  • All 

  • UNIT STANDARD CCFO SCIENCE 
    Use science and technology effectively and critically, showing responsibility towards the environment and health of others.

    Assessment criteria:
  • Measuring device is used correctly.
  • Pipe sizes are measured accurately to specifications.
  • Pipe lengths are measured accurately and visually identified.
  • Associated fittings are measured accurately. 

  • UNIT STANDARD CCFO DEMONSTRATING 
    Demonstrate an understanding of the world as a set of related systems by recognising that problem-solving contexts do not exist in isolation.

    Assessment criteria:
  • None 

  • UNIT STANDARD ASSESSOR CRITERIA 
    N/A 

    UNIT STANDARD NOTES 
    Integrated Assessment

    When conducting assessments, assessors must ensure that they are familiar with the full text of the unit standards being assessed. Assessors must ensure that the assessment covers the specific outcomes, critical cross-field outcomes and essential embedded knowledge by developing assessment activities and tools, which are appropriate to the contexts in which the learners are working. These activities and tools may include self-assessment, peer assessment, formative and summative assessment. It may be more effective and efficient to assess a number of unit standards together in an integrated way, thus reducing the overall number of assessments and ensuring that commonalities that exist between a number of unit standards are captured in a way that makes sense for assessment.

    Assessment Option

    Learners could be assessed using the following methods:
  • Oral or written questions
  • Observation or simulation 

  • QUALIFICATIONS UTILISING THIS UNIT STANDARD: 
      ID QUALIFICATION TITLE PRE-2009 NQF LEVEL NQF LEVEL STATUS END DATE PRIMARY OR DELEGATED QA FUNCTIONARY
    Core  48907   National Certificate: Wastewater Reticulation Services  Level 2  NQF Level 02  Passed the End Date -
    Status was "Registered" 
    2007-06-09  Was EWSETA until Last Date for Achievement 


    PROVIDERS CURRENTLY ACCREDITED TO OFFER THIS UNIT STANDARD: 
    This information shows the current accreditations (i.e. those not past their accreditation end dates), and is the most complete record available to SAQA as of today. Some Primary or Delegated Quality Assurance Functionaries have a lag in their recording systems for provider accreditation, in turn leading to a lag in notifying SAQA of all the providers that they have accredited to offer qualifications and unit standards, as well as any extensions to accreditation end dates. The relevant Primary or Delegated Quality Assurance Functionary should be notified if a record appears to be missing from here.
     
    NONE 



    All qualifications and part qualifications registered on the National Qualifications Framework are public property. Thus the only payment that can be made for them is for service and reproduction. It is illegal to sell this material for profit. If the material is reproduced or quoted, the South African Qualifications Authority (SAQA) should be acknowledged as the source.